Hello Jeff, All calls worked when i configure the xcoder on the cme
The question says use the hq router resources- that is where i have issues thanks On Fri, Mar 12, 2010 at 11:33 PM, Jeff Cotter <jcot...@voxns.com> wrote: > FYI, I was only able to get this to work using transcoder on CME. Had to > match the codec between UCM trunk and incoming dial-peer on CME…then xcoder > would engage on CME for the SIP phone. I have a hardware limitation in my > home lab so I am not able to configure a xcoder on both UCM and CME > simultaneously. > > > > > > > > > > *From:* Omotayo [mailto:adefilabi...@gmail.com] > *Sent:* Friday, March 12, 2010 6:33 AM > *To:* Otto Sanchez > *Cc:* Jeff Cotter; ccie_voice@onlinestudylist.com > > *Subject:* Re: [OSL | CCIE_Voice] SIP Hardware Transcoder > > > > Hello Otto, > > > > i had same issue > > > > The transcoder can be on the trunk? > > > > When i did the transcoder on the br2 router, i get a busy tone when the sip > phone is being called from the hq phone > > > > REgards > > On Fri, Mar 12, 2010 at 12:59 PM, Otto Sanchez <o...@ipexpert.com> wrote: > > Hi Jeff, > > Would you please tell us more about the call flow and the end to end codec > requirements for this call. If doing g.729 over the wan, and your sip phone > is using g.711 you should transcode at br2, > > Please let us know, > > Thanks, > > On Thu, Mar 11, 2010 at 8:29 PM, Jeff Cotter <jcot...@voxns.com> wrote: > > Can anybody tell me if a PVDM2-32 can be used as a hardware transcoder > on UCM. Can’t seem to get a call from Call Manager to CME sip phone > working. I can call from CME to UCM but not the other way around. Rings but > disconnects when answered. Transcoder shows registered in Call manager. > Thanks > > > > > > Jeff > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > > -- > Regards, > > Otto Sanchez > CCIE #25592 (Voice) > Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
