Hi, Sorry for the incomplete email earlier. Has anyone tried cBarge in SRST mode? I have my conference bridge registered to telephony service when it goes into SRST. I have used priority 3 as the telephony-service address. When my phones go in SRST mode, I can see they have shared line and when I am making a call on this shared line, I can see both phones ringing. However, if i receive call at one phone and try to Barge in using another all I get is a dialtone..no Cbarge softkey or anything even thou Cbarge key is configured under ephone template. Also privacy is off at telephony service. I even went into ephones and turned the privacy off but it is still not working. For some reason its not bringing the remote-in-use softkey template. I am getting a new call softkey template.
R2#sh ephone ephone-1[0] Mac:0017.9402.CF34 TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 17/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:11 privacy:0 IP:192.168.10.22 33399 7961 keepalive 0 max_line 6 button 1: dn 5 number 4001 CM Fallback CH1 IDLE CH2 IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 IDLE CH8 IDLE button 2: dn 6 number 4021 CM Fallback CH1 IDLE CH2 IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 IDLE CH8 IDLE * shared* Preferred Codec: g711ulaw ephone-2[1] Mac:0030.94C3.EE93 TCP socket:[3] activeLine:0 REGISTERED in SCCP ver 11/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8 privacy:0 IP:192.168.10.17 52129 Telecaster 7960 keepalive 3 max_line 6 button 1: dn 7 number 4002 CM Fallback CH1 IDLE CH2 IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 IDLE CH8 IDLE button 2: dn 6 number 4021 CM Fallback CH1 IDLE CH2 IDLE CH3 IDLE CH4 IDLE CH5 IDLE CH6 IDLE CH7 IDLE CH8 IDLE shared Preferred Codec: g711ulaw Adios
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
