If you have put a newer image on the cucm server make sure you have restarted the tftp service. The server will not recognize new files until the service has restarted.
-- On Jul 28, 2010, at 4:58, Shady Hasan <[email protected]> wrote: > I know you may made this before, but: > 1. make a factory reset to the 7936 (look for the required sequence from the > phone manual) > 2. make sure that the DHCP server give the correct TFTP server IP address > 3. try to Manually set the TFTP IP address to the 7936 > > Regards, > Shady. > > On Wed, Jul 28, 2010 at 1:47 PM, Ashar Siddiqui <[email protected]> wrote: > Hello, > > > > I am trying to make one 7936 conference phone for a customer to register > with call manager. > > No matter what I do, it is not getting registered. It says ‘ TFTP server not > found’. > > I can ping the IP address of the phone from Call manager and from phone I can > ping rest of the network. All good. > > For some reason it’s not downloading the firmware from Call manager and hence > stuck in a loop. > > > > Is there any way of getting a new Firmware on to this phone without > downloading it from the CallManager? > > > > Thanks > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
