Hi Shrini, You would need to add the DN that you wish to monitor in that sense (DND plus line state change) with this config:
! ephone-dn 1 number 3001 ! ephone-dn 2 number 3002 ! ! ephone 1 description == Watch My Line 1! button 1:1 ! ephone 2 description == I'm Watching You!! button 1:2 2w1 ! Kind Regards, Mark Snow, CCIE #14073 (Voice, Security) Instructor Internetwork Expert, Inc. INE Online Community INE Blog LinkedIn Toll Free: 877-224-8987 Outside US: +1 775 826 4344 - docendo discitur On Jan 21, 2011, at 2:50 PM, Shrini wrote: > Hi Team, > > I configured BLF on CUCM and I wanted to get it worked in the same way in CME > too. > > Scenario: > > I have two lines on the phone. > > In CUCM when I configure BLF for Line 1 and it works as expected. BLF > flickers for incoming call , turn red in active call / off hook / DnD. > > But on CME. > > There are two options : > > blf or watch > > If I do blf it only lits red when active / off hook not with DnD. > > If I do watch phone it lits in all conditions as mentioned above in CUCM > excepts incoming call but It watched line 2 also. > > How can I configure same exacltly like it is working on CUCM. > > http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1022428 > > In the above documentation it is mentioned that BLF does not work for DnD in > CME 7.0 > > Please advice > > T I A > Shrini > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
