Shrini, You will want to setup your CME configuration something like this:
ephone-dn 1 oct number 1000 no-reg name Line1 Phn1 ephone-dn 2 oct number 1001 no-reg name Line2 Phn1 ephone-dn 3 oct number 1002 no-reg name Line1 Phn2 ephone 1 mac 1111.2222.3333 button 1:1 2:2 ... ephone 2 mac 4444.5555.6666 button 1:3 *2w1* ... This will allow you to watch Phone 1 Line 1 using your button2 on Phone 2. You will get idle/off-hook/DnD for only this line. HTH -Adam On Fri, Jan 21, 2011 at 2:50 PM, Shrini <[email protected]> wrote: > Hi Team, > > I configured BLF on CUCM and I wanted to get it worked in the same way in > CME too. > > Scenario: > > I have two lines on the phone. > > In CUCM when I configure BLF for Line 1 and it works as expected. > BLF flickers for incoming call , turn red in active call / off hook / DnD. > > But on CME. > > There are two options : > > blf or watch > > If I do blf it only lits red when active / off hook not with DnD. > > If I do watch phone it lits in all conditions as mentioned above in CUCM > excepts incoming call but It watched line 2 also. > > How can I configure same exacltly like it is working on CUCM. > > > http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1022428 > > In the above documentation it is mentioned that BLF does not work for DnD > in CME 7.0 > > Please advice > > T I A > Shrini > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
