You have to put in red: !
sccp ccm group 1 associate ccm 3 priority 1 associate ccm 2 priority 2 associate ccm 1 priority 3 ! Best regards, Tamer Ismail From: [email protected] [mailto:[email protected]] On Behalf Of Rahul Kapor Sent: Tuesday, March 29, 2011 1:32 PM To: Rogers Ochieng Cc: [email protected] Subject: Re: [OSL | CCIE_Voice] Hardware conference is stuck in state "TCP_CONN_ERROR" Hi All , thanks for replying. here is my sccp config sccp local GigabitEthernet0/0 sccp ccm 14.160.115.200 identifier 1 version 7.0 sccp ccm 14.160.116.40 identifier 2 version 7.0 sccp ccm 14.160.110.22 identifier 3 version 7.0 sccp sccp ccm group 1 associate ccm 3 priority 1 associate profile 1 register BR1-CONF dspfarm profile 1 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 1 conference-join custom-cptone join conference-leave custom-cptone leave associate application SCCP ! I am adding Hardware conf in CUCM as BR1-CONF but status is unknown-unknown. sh sccp SCCP Admin State: UP Gateway Local Interface: GigabitEthernet0/0 IPv4 Address: 14.160.110.35 Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 14.160.115.200, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Call Manager: 14.160.116.40, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 2 Trustpoint: N/A Call Manager: 14.160.110.22, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 3 Trustpoint: N/A Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR Active Call Manager: NONE TCP Link Status: CONNECT_PENDING, Profile Identifier: 1 Reported Max Streams: 8, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 reloaded the router again but no help. thx, Rahul On Tue, Mar 29, 2011 at 12:28 PM, Rogers Ochieng <[email protected]> wrote: Your sccp and telephony service config will help On 28 March 2011 18:57, Rahul Kapor <[email protected]> wrote: Hi all , I am trying to register my hardware conference to cucm/cme but it is stuck in "TCP_CONN_ERROR" error state. sh sccp Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR Active Call Manager: NONE TCP Link Status: CONNECT_PENDING, Profile Identifier: 1 Reported Max Streams: 8, Reported Max OOS Streams: 0 ... ... reloaded the router but did not help! Please suggest. Thx, Rahul _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
