Sounds like you are having a TCP Connectivity issue with the CUCM.
Is the Cisco CallManager Service started on all nodes?
Can you telnet to port 2000 on all nodes?
Are the IP addresses correct?
Have you tried removing any QOS config?
Regards,
Adam
------------Original Message--------------
From: Rahul Kapor <rahul.kapo...@gmail.com>
Sent: Tue, Mar 29, 2011 11:32:19 Am
To: Rogers Ochieng <rogersochi...@gmail.com>
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Hardware conference is stuck in state
"TCP_CONN_ERROR"
Hi All,
I did reset , reload , no sccp , sccp but did not help. DIf f conf
bridge from diff router can be registered with CUCM so looks like ,
PVDM has gone into hung state.
Is there any way to reset the PVDM ?
th,
Rahul
On Tue, Mar 29, 2011 at 8:30 PM, Rogers Ochieng
<rogersochi...@gmail.com <mailto:rogersochi...@gmail.com>> wrote:
Since i think this is CUCM with SRST scenario. Try this
sccp local GigabitEthernet0/0
sccp ccm 14.160.115.200 identifier 1 version 7.0
sccp ccm 14.160.116.40 identifier 2 version 7.0
sccp ccm 14.160.110.22 identifier 3 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate profile 1 register BR1-CONF
dspfarm profile 1 conference
codec g711ulaw
codec g729r8
maximum sessions 1
conference-join custom-cptone join
conference-leave custom-cptone leave
associate application SCCP
!
telephony-service
sdspfarm units 1
sdspfarm tag 1 BR1-CONF
conference hardware
ephone-dn 10 octo-line
number B3333
conference meet-me
no huntstop
On 29 March 2011 14:31, Rahul Kapor <rahul.kapo...@gmail.com
<mailto:rahul.kapo...@gmail.com>> wrote:
Hi All ,
thanks for replying.
here is my sccp config
sccp local GigabitEthernet0/0
sccp ccm 14.160.115.200 identifier 1 version 7.0
sccp ccm 14.160.116.40 identifier 2 version 7.0
sccp ccm 14.160.110.22 identifier 3 version 7.0
sccp
sccp ccm group 1
associate ccm 3 priority 1
associate profile 1 register BR1-CONF
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 1
conference-join custom-cptone join
conference-leave custom-cptone leave
associate application SCCP
!
I am adding Hardware conf in CUCM as BR1-CONF but status is
unknown-unknown.
sh sccp
SCCP Admin State: UP
Gateway Local Interface: GigabitEthernet0/0
IPv4 Address: 14.160.110.35
Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 14.160.115.200, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 1
Trustpoint: N/A
Call Manager: 14.160.116.40, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 2
Trustpoint: N/A
Call Manager: 14.160.110.22, Port Number: 2000
Priority: N/A, Version: 7.0, Identifier: 3
Trustpoint: N/A
Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code:
TCP_CONN_ERROR
Active Call Manager: NONE
TCP Link Status: CONNECT_PENDING, Profile Identifier: 1
Reported Max Streams: 8, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g729br8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization
Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum
Packetization Period: 30
reloaded the router again but no help.
thx,
Rahul
On Tue, Mar 29, 2011 at 12:28 PM, Rogers Ochieng
<rogersochi...@gmail.com <mailto:rogersochi...@gmail.com>> wrote:
Your sccp and telephony service config will help
On 28 March 2011 18:57, Rahul Kapor
<rahul.kapo...@gmail.com <mailto:rahul.kapo...@gmail.com>>
wrote:
Hi all ,
I am trying to register my hardware conference to
cucm/cme but it is stuck in "TCP_CONN_ERROR" error
state.
sh sccp
Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause
Code: TCP_CONN_ERROR
Active Call Manager: NONE
TCP Link Status: CONNECT_PENDING, Profile Identifier: 1
Reported Max Streams: 8, Reported Max OOS Streams: 0
...
...
reloaded the router but did not help!
Please suggest.
Thx,
Rahul
_______________________________________________
For more information regarding industry leading CCIE
Lab training, please visit www.ipexpert.com
<http://www.ipexpert.com/>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
