Your ccm group is configured to only register with 1 call mgr... sccp ccm 14.160.110.22 identifier 3 version 7.0
reset the resources in call manager and do a 'no sccp/sccp' on the gateway. Make sure your cfb in call mgr is defined correctly with identical name: BR1-CONF On Tue, Mar 29, 2011 at 5:31 AM, Rahul Kapor <[email protected]>wrote: > Hi All , > > thanks for replying. > here is my sccp config > > sccp local GigabitEthernet0/0 > sccp ccm 14.160.115.200 identifier 1 version 7.0 > sccp ccm 14.160.116.40 identifier 2 version 7.0 > sccp ccm 14.160.110.22 identifier 3 version 7.0 > sccp > sccp ccm group 1 > associate ccm 3 priority 1 > associate profile 1 register BR1-CONF > > dspfarm profile 1 conference > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 1 > conference-join custom-cptone join > conference-leave custom-cptone leave > associate application SCCP > ! > > I am adding Hardware conf in CUCM as BR1-CONF but status is > unknown-unknown. > sh sccp > SCCP Admin State: UP > Gateway Local Interface: GigabitEthernet0/0 > IPv4 Address: 14.160.110.35 > Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 14.160.115.200, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > Call Manager: 14.160.116.40, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 2 > Trustpoint: N/A > Call Manager: 14.160.110.22, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 3 > Trustpoint: N/A > > > Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR > Active Call Manager: NONE > TCP Link Status: CONNECT_PENDING, Profile Identifier: 1 > Reported Max Streams: 8, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g711alaw, Maximum Packetization Period: 30 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > > reloaded the router again but no help. > > thx, > Rahul > > > > > > On Tue, Mar 29, 2011 at 12:28 PM, Rogers Ochieng > <[email protected]>wrote: > >> Your sccp and telephony service config will help >> >> On 28 March 2011 18:57, Rahul Kapor <[email protected]> wrote: >> >>> >>> Hi all , >>> >>> I am trying to register my hardware conference to cucm/cme but it is >>> stuck in "TCP_CONN_ERROR" error state. >>> >>> sh sccp >>> Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR >>> Active Call Manager: NONE >>> TCP Link Status: CONNECT_PENDING, Profile Identifier: 1 >>> Reported Max Streams: 8, Reported Max OOS Streams: 0 >>> ... >>> ... >>> >>> reloaded the router but did not help! >>> >>> Please suggest. >>> >>> Thx, >>> Rahul >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
