Ok - thanks- will fix this. -- Vik Malhi – CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: [email protected] Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130
On Nov 27, 2011, at 11:41 AM, Larry Stern <[email protected]> wrote: > I also found in my rack 33, the pstn line 3 for calling number only sends 408 > I had to modify this in the PSTN router > > rule 2 from > /^\(408\)8397263$ to /^408\(8397263)/ /\1/. > Try typing that fast on an IPAD(lol) > This was for lab 1and 2. > > Sent from my iPad > > On Nov 27, 2011, at 12:12 PM, "Edgar Feliz" <[email protected]> wrote: > >> Guys I have been working on the new (5) labs mostly 1-3 since they have the >> guide. Here is what i have found to be things to watch for and fixes, >> >> Please note i have been working on these for over 10 days and it's the same >> every time it is just the way the integration was done for the VM images >> purposely or not. >> >> There are some typos you will see reference to 011916745738931 but if you >> try to call that number it is not available true number is 011916745738931 >> There are some others name of routers in guide not always right when you >> look for solutions so just make sure you note what router you are working >> on. I think this is mainly because of copy and pasting from one lab to >> another etc since some things are similar but devices are different. >> UCCX integration; >> rmjtapi app-user is not configured > add rmjtapi > add phones and cti enable >> make sure pwds match on CCX and CUCM for jtapi_1 and rmjtapi >> from CCX run sync and restart engine >> You may have to re-sync a couple of times >> the "T" flag is not set so the CUCM never sees that the CCX is integrated >> you have to do a manual step to get this up and running so you can add the >> UCCX extension to users, >> run this command on the CUCM Pub as stated in earleir emails > run sql >> update processconfig set paramvalue="T" where paramname like '%nstalled%' >> NO need to reload it takes affect right away >> CUC - I have had to reload the CUC server every time for MWIs and to be able >> to leave message... This one I am not sure why I have no fix other than to >> restart the server. >> CUE - As noted in labs WB and Guide you will need to change licenses >> depending on the lab you are working on. >> Lab 2 CCXquestion there is a step missing in the script. a generated prompt >> of zero calls ahead of you when you are the only one in queue = you do need >> the decrement step (thanks larry) >> If i recall or run into any more items of interest i will post back i am in >> last 5 days of prep and will be concentrating on the labs >> >> E >> > > This email and any files transmitted with it are confidential and are > intended for the sole use of the individual to whom they are addressed. Black > Box Corporation reserves the right to scan all e-mail traffic for restricted > content and to monitor all e-mail in general. If you are not the intended > recipient or you have received this email in error, any use, dissemination or > forwarding of this email is strictly prohibited. If you have received this > email in error, please notify the sender by replying to this email. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
