I'm adding secondary dialtone to my CUCME and SRST configurations as well. In my mind, we should be trying to preserve as much of the CUCM configuration as possible. Not sure that it helps with grading, but better safe than sorry I guess.
On Sun, Feb 17, 2013 at 4:58 AM, Pixar Perfect <[email protected]>wrote: > Thanks, makes sense. One of those few configurations on the exam that > sticks to the design guidelines & field deployments. :) :) > > ------------------------------ > Date: Sat, 16 Feb 2013 17:48:16 -0600 > Subject: Re: [OSL | CCIE_Voice] SRST transfer system and pattern > From: [email protected] > To: [email protected] > CC: [email protected]; [email protected] > > > Hi, > > As per cisco CME design guide these commands are necessary. Please refer > cisco CME SRND. > > > http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/clproc.html#wp1068396 > > Regards, > Ramcharan Arya > CCIE # 28926 ( R&S) > > > On Fri, Feb 15, 2013 at 4:51 PM, Cory Gray <[email protected]>wrote: > > I have had several conversations with people on this. Everyone can easily > make SRST work but scoring points seems to be the trickiest thing in the > lab. So I do not think anyone knows for sure what should or should not be > on the “template” I have never scored any points there so I cannot give an > OPINION on what should or should not be there. People say they score > points and then go with the same template on the next lab and get 0 so it > is a mystery. People can share templates without breaking NDA since the > question is never discussed. Getting the question right is the easy part! > **** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Pixar Perfect > *Sent:* Friday, February 15, 2013 5:26 PM > *To:* CCIE Voice OSL > *Subject:* [OSL | CCIE_Voice] SRST transfer system and pattern**** > > ** ** > > transfer-system full-consult do we need to specify this? I thought by > default it is wnabled but I read on voiceie forum someone scored nothing on > SRST adn the only conclusion was the transfersystem consult was missing. > Any thoughts?**** > > ** ** > > srst mode auto-provision all**** > > srst ephone description SRST-EPHONES-CME **** > > srst dn template 1**** > > srst dn line-mode octo**** > > max-ephones 10**** > > max-dn 10 preference 2 no-reg both**** > > ip source-address 10.10.1.13 <SiteC Loopback> port 2000**** > > time-zone 42**** > > max-conferences 8 gain -6**** > > call-forward pattern .T**** > > time-webedit **** > > * transfer-system full-consult***** > > * transfer-pattern .T***** > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
