Thanks Stefan. - DTIM period:
Agree, it should be configured under SSID, not dot11radio interface (as I did). If we configure DTIM period under SSID as you suggested, then in DSG we should see: dot11 ssid HQData2 vlan HQData2 authentication open eap eap_methods authentication key-management wpa optional mbssid guest-mode dtim-period 2 And we have: dot11 ssid Test3 mbssid guest-mode ------------------ Vit On Sun, Jan 23, 2011 at 8:43 PM, Stefan Angerer <[email protected]>wrote: > Hi, > > > > - VLAN names: > > I had the chance to talk to Jason about this (I had the same thoughts as > you) - this is just matter of wording J > > > > - Test5: > > the clients are using CCK – since 802.11a uses only OFDM there is no need > to enable d1 > > > > - DTIM period: > > > > you can set a DTIM interval individually for each SSID when using mbssid > mode: > > > > dot11 ssid YOURSSID > > mbssid guest-mode dtim-period xy > > > > hth! > > > > regards > > Stefan > > > > *Von:* [email protected] [mailto: > [email protected]] *Im Auftrag von *Vitaly Fokin > *Gesendet:* Sonntag, 23. Jänner 2011 20:19 > *An:* [email protected] > *Betreff:* [CCIE Wireless] Lab 3.2 questions > > > > Jason, > > > > Lab 3.2 begins with: > > > > Configure the following SSIDs. Each SSID will have the following > parameters: > > - Use the name of the VLANs for the SSIDs. > > > > In DSG all SSIDs are Test1, Test2, etc... Should not we use name of the > VLANs instead - HQGuest1, HQData1, etc? > > > > For SSID Test5 task does not specify what radio interface it should be > applied to - 2.4 / 5 / both ? DSG suggests 2.4 only (dot11 0.15) - why? > > > > For SSID Test3 we need: > > - Broadcast this SSID, with a DTIM of 200 msec > > > > My understanding is that we do not need to do anything, as the default > beacon period is 100, and the default DTIM is 2. Therefore if we configure > 'beacon dtim-period 2' it won't appear under config. Could explanation be > added to DSG with regards to this please? > > > > Thank you. > > ------------------ > Vit >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
