I forgot to add that Jason has already confirmed this DSG bug. Sorry for the confusion!
Regards Stefan PS: again a reason, why a central "bug tracking tool" would be very helpful for this community ... Von: Vitaly Fokin [mailto:[email protected]] Gesendet: Sonntag, 23. Jänner 2011 22:04 An: Stefan Angerer Cc: [email protected] Betreff: Re: [CCIE Wireless] Lab 3.2 questions Thanks Stefan. - DTIM period: Agree, it should be configured under SSID, not dot11radio interface (as I did). If we configure DTIM period under SSID as you suggested, then in DSG we should see: dot11 ssid HQData2 vlan HQData2 authentication open eap eap_methods authentication key-management wpa optional mbssid guest-mode dtim-period 2 And we have: dot11 ssid Test3 mbssid guest-mode ------------------ Vit On Sun, Jan 23, 2011 at 8:43 PM, Stefan Angerer <[email protected]<mailto:[email protected]>> wrote: Hi, - VLAN names: I had the chance to talk to Jason about this (I had the same thoughts as you) - this is just matter of wording :) - Test5: the clients are using CCK - since 802.11a uses only OFDM there is no need to enable d1 - DTIM period: you can set a DTIM interval individually for each SSID when using mbssid mode: dot11 ssid YOURSSID mbssid guest-mode dtim-period xy hth! regards Stefan Von: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] Im Auftrag von Vitaly Fokin Gesendet: Sonntag, 23. Jänner 2011 20:19 An: [email protected]<mailto:[email protected]> Betreff: [CCIE Wireless] Lab 3.2 questions Jason, Lab 3.2 begins with: Configure the following SSIDs. Each SSID will have the following parameters: - Use the name of the VLANs for the SSIDs. In DSG all SSIDs are Test1, Test2, etc... Should not we use name of the VLANs instead - HQGuest1, HQData1, etc? For SSID Test5 task does not specify what radio interface it should be applied to - 2.4 / 5 / both ? DSG suggests 2.4 only (dot11 0.15) - why? For SSID Test3 we need: - Broadcast this SSID, with a DTIM of 200 msec My understanding is that we do not need to do anything, as the default beacon period is 100, and the default DTIM is 2. Therefore if we configure 'beacon dtim-period 2' it won't appear under config. Could explanation be added to DSG with regards to this please? Thank you. ------------------ Vit
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
