Hi Ralph, Just a sanity check. Did you have WDS configured for this?
CCKM on autonomous only works when you have WDS configured. Cheers, Brendon On 28/01/11 8:33 PM, "Ralph Olsen" <[email protected]> wrote: >Hi, > >I have a problem with getting the ssid Test5 to work with the ADU >client in the Proctorlabs setup. I have configured the SSID Test5 >using LEAP, local radius and it looks like my config is somewhere near >the DSG config. My problem is that I can't get the ADU client to >connect to the SSID. > >This is some of my config: > >dot11 ssid Test5-rao > vlan HQVoice1 > authentication open eap eap_methods2 > authentication network-eap eap_methods2 > authentication key-management cckm >! >interface Dot11Radio0 > encryption vlan HQVoice1 mode ciphers ckip-cmic > ssid Test5-rao >! > >When i remove the CCKM from key-management the ADU works connect to >the SSID with 802.1x mode and LEAP. So the radius, aaa, bridge-group >part seems fine. I do get: > >Jan 28 09:14:42.285: %DOT11-6-ASSOC: Interface Dot11Radio0, Station >WL02-LAPTOP 0040.96b1.8207 Associated KEY_MGMT[NONE] <--- KEY_MGMT = >NONE. > >When I add the key-management cckm and correct the ADU to use >WPA/WPA2/CCKM with LEAP it never connects... :o( > >Anyone got a hint? > >/Ralph >_______________________________________________ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
