Hi Ralph, I can't verify now but I'm sure cckm will work only if u configure wds.
Let me see if I can find any document. Pls let us know if it works without wds. It would be great to know. Regards, Brendon Sent from my iPhone On 30/01/2011, at 5:39 PM, Ralph Olsen <[email protected]> wrote: > Hi Brendon, > > Nope, I don't. And the DSG points in the direction of having each > access-point validate agains a local radius totally independant of > each other (2 CCKM "sessions" as I see it). But I tried playing with > the Repeater function, and createde an Open SSID on both and it still > didn't work. I do have a feeling that it might be a software bug in > one of the AP's. I'm gonna try in the next couple of hours with 2 > different access-points. > > > /Ralph > > 2011/1/30 Brendon Hwang <[email protected]>: >> Hi Ralph, >> >> Just a sanity check. >> Did you have WDS configured for this? >> >> CCKM on autonomous only works when you have WDS configured. >> >> Cheers, >> Brendon >> >> On 28/01/11 8:33 PM, "Ralph Olsen" <[email protected]> wrote: >> >>> Hi, >>> >>> I have a problem with getting the ssid Test5 to work with the ADU >>> client in the Proctorlabs setup. I have configured the SSID Test5 >>> using LEAP, local radius and it looks like my config is somewhere near >>> the DSG config. My problem is that I can't get the ADU client to >>> connect to the SSID. >>> >>> This is some of my config: >>> >>> dot11 ssid Test5-rao >>> vlan HQVoice1 >>> authentication open eap eap_methods2 >>> authentication network-eap eap_methods2 >>> authentication key-management cckm >>> ! >>> interface Dot11Radio0 >>> encryption vlan HQVoice1 mode ciphers ckip-cmic >>> ssid Test5-rao >>> ! >>> >>> When i remove the CCKM from key-management the ADU works connect to >>> the SSID with 802.1x mode and LEAP. So the radius, aaa, bridge-group >>> part seems fine. I do get: >>> >>> Jan 28 09:14:42.285: %DOT11-6-ASSOC: Interface Dot11Radio0, Station >>> WL02-LAPTOP 0040.96b1.8207 Associated KEY_MGMT[NONE] <--- KEY_MGMT = >>> NONE. >>> >>> When I add the key-management cckm and correct the ADU to use >>> WPA/WPA2/CCKM with LEAP it never connects... :o( >>> >>> Anyone got a hint? >>> >>> /Ralph >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >> >> >> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
