Hi Brendon, Nevermind my answer before. I was all caught up in the 3.8 LAB with repeaters where I also have some issues. I'll try the WDS part to see if that works.
/Ralph 2011/1/30 Brendon Hwang <[email protected]>: > Hi Ralph, > > I can't verify now but I'm sure cckm will work only if u configure wds. > > Let me see if I can find any document. > > Pls let us know if it works without wds. It would be great to know. > > Regards, > Brendon > > Sent from my iPhone > > On 30/01/2011, at 5:39 PM, Ralph Olsen <[email protected]> wrote: > >> Hi Brendon, >> >> Nope, I don't. And the DSG points in the direction of having each >> access-point validate agains a local radius totally independant of >> each other (2 CCKM "sessions" as I see it). But I tried playing with >> the Repeater function, and createde an Open SSID on both and it still >> didn't work. I do have a feeling that it might be a software bug in >> one of the AP's. I'm gonna try in the next couple of hours with 2 >> different access-points. >> >> >> /Ralph >> >> 2011/1/30 Brendon Hwang <[email protected]>: >>> Hi Ralph, >>> >>> Just a sanity check. >>> Did you have WDS configured for this? >>> >>> CCKM on autonomous only works when you have WDS configured. >>> >>> Cheers, >>> Brendon >>> >>> On 28/01/11 8:33 PM, "Ralph Olsen" <[email protected]> wrote: >>> >>>> Hi, >>>> >>>> I have a problem with getting the ssid Test5 to work with the ADU >>>> client in the Proctorlabs setup. I have configured the SSID Test5 >>>> using LEAP, local radius and it looks like my config is somewhere near >>>> the DSG config. My problem is that I can't get the ADU client to >>>> connect to the SSID. >>>> >>>> This is some of my config: >>>> >>>> dot11 ssid Test5-rao >>>> vlan HQVoice1 >>>> authentication open eap eap_methods2 >>>> authentication network-eap eap_methods2 >>>> authentication key-management cckm >>>> ! >>>> interface Dot11Radio0 >>>> encryption vlan HQVoice1 mode ciphers ckip-cmic >>>> ssid Test5-rao >>>> ! >>>> >>>> When i remove the CCKM from key-management the ADU works connect to >>>> the SSID with 802.1x mode and LEAP. So the radius, aaa, bridge-group >>>> part seems fine. I do get: >>>> >>>> Jan 28 09:14:42.285: %DOT11-6-ASSOC: Interface Dot11Radio0, Station >>>> WL02-LAPTOP 0040.96b1.8207 Associated KEY_MGMT[NONE] <--- KEY_MGMT = >>>> NONE. >>>> >>>> When I add the key-management cckm and correct the ADU to use >>>> WPA/WPA2/CCKM with LEAP it never connects... :o( >>>> >>>> Anyone got a hint? >>>> >>>> /Ralph >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, please >>>> visit www.ipexpert.com >>> >>> >>> > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
