No worries man... just write all the items that you think you did wrong... im sure the you're next take will be a success!!!
After the exam did the proctor inform you where you failed? So that you can review it. Cheers, Manolo S. Encelan Presales Engineer BT Al Saudia|P.O.Box 16828|Riyadh 11474|Saudi Arabia| Mob :+966555048119 | Fax: +966 1 476 2808 Email : [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of sun dell Sent: Wednesday, April 25, 2012 8:21 AM To: [email protected] Subject: Re: [OSL | CCIE_Wireless] CCIE_Wireless Digest, Vol 36, Issue 11 Failed the labv2 again, not sure where I have done wrong exactly, I am pretty sure I have everything worked, just not enough score, sigh! :( Zq The better you're serving, the better you'll be served > From: > [email protected]<mailto:[email protected]> > Subject: CCIE_Wireless Digest, Vol 36, Issue 11 > To: > [email protected]<mailto:[email protected]> > Date: Sun, 15 Apr 2012 12:00:03 -0400 > > Send CCIE_Wireless mailing list submissions to > [email protected]<mailto:[email protected]> > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > or, via email, send a message with subject or body 'help' to > [email protected]<mailto:[email protected]> > > You can reach the person managing the list at > [email protected]<mailto:[email protected]> > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Wireless digest..." > > > Today's Topics: > > 1. Re: CCIE_Wireless Digest, Vol 36, Issue 10 (Raul Manzano) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 15 Apr 2012 10:50:20 +0200 > From: Raul Manzano <[email protected]<mailto:[email protected]>> > To: > [email protected]<mailto:[email protected]> > Subject: Re: [OSL | CCIE_Wireless] CCIE_Wireless Digest, Vol 36, Issue > 10 > Message-ID: > <CAOZEa23GgNPkVawX1QNaiMDOW9qF5xzWmLXva4P=87p1v-q...@mail.gmail.com<mailto:CAOZEa23GgNPkVawX1QNaiMDOW9qF5xzWmLXva4P=87p1v-q...@mail.gmail.com>> > Content-Type: text/plain; charset="iso-8859-1" > > Thanks Kristjan for the answer, very interesting!!! > > Good work!!!! > > El 14 de abril de 2012 18:00, > <[email protected]<mailto:[email protected]>>escribi?: > > > Send CCIE_Wireless mailing list submissions to > > [email protected]<mailto:[email protected]> > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > > or, via email, send a message with subject or body 'help' to > > [email protected]<mailto:[email protected]> > > > > You can reach the person managing the list at > > [email protected]<mailto:[email protected]> > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of CCIE_Wireless digest..." > > > > > > Today's Topics: > > > > 1. WGP to Capwap WLC via anchor on DMZ - solution > > (Kristj?n ?lafur E?var?sson) > > 2. Re: WGP to Capwap WLC via anchor on DMZ - solution (Jason Boyers) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Fri, 13 Apr 2012 16:18:59 +0000 > > From: Kristj?n ?lafur E?var?sson > > <[email protected]<mailto:[email protected]>> > > To: > > "[email protected]<mailto:[email protected]>" > > <[email protected]<mailto:[email protected]>> > > Subject: [OSL | CCIE_Wireless] WGP to Capwap WLC via anchor on DMZ - > > solution > > Message-ID: <2426A68554621145BDCFB71806B8FB6F1AB2E8B2@EXCH> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hey guys, > > > > The solution for my WGB - WLC foregin to WLC anchor is the following: > > > > facts: > > The WGP as station role worgroup-bridge (default Cisco mode) works fine > > directly to a internal 5508 controller > > as IAPP works smoothly there. > > > > When the 5508 anchors to 4402 on a DMZ. The EtheroverIP tunnel makes the > > game different. The DMZ controller > > gives IP to the wired client behind the WGB but it doesn?t like to pass > > traffic through since there is one MAC (the WGB) > > asking for several IP?s to connect from the WGB. The IAPP is broken in > > this situation. > > > > Luckily the solution is this CLI command on the DMZ anchor: > > > > config WGB vlan enable > > > > And traffic is passed through without more changes. > > > > This command does the following: > > The DMZ Anchor says to the WGB. Give me a updated list of your clients and > > I will pass them through as > > normally I don?t like several IP?s to come from one association as I see > > you by default. Thats why > > I could?t list the wired cilent in my client table over the EtheroverIP > > tunnel. > > > > Makes sense ? > > > > regards. Kristjan > > > > > > ------------------------------ > > > > Message: 2 > > Date: Fri, 13 Apr 2012 12:36:08 -0400 > > From: Jason Boyers <[email protected]<mailto:[email protected]>> > > To: Kristj?n ?lafur E?var?sson <[email protected]<mailto:[email protected]>> > > Cc: > > "[email protected]<mailto:[email protected]>" > > <[email protected]<mailto:[email protected]>> > > Subject: Re: [OSL | CCIE_Wireless] WGP to Capwap WLC via anchor on DMZ > > - solution > > Message-ID: > > <calo5k2tbe3crpq-aab3in1jxhs4uy6twjgslvlcw_cbz_tw...@mail.gmail.com <mailto:calo5k2tbe3crpq-aab3in1jxhs4uy6twjgslvlcw_cbz_tw...@mail.gmail.com%0b>> > > > > Content-Type: text/plain; charset="iso-8859-1" > > > > Great work, Kristjan! > > > > Jason Boyers, CCIE #26024 (Wireless) > > Blog: netboyers.wordpress.com > > > > > > 2012/4/13 Kristj?n ?lafur E?var?sson > > <[email protected]<mailto:[email protected]>> > > > > > Hey guys, > > > > > > The solution for my WGB - WLC foregin to WLC anchor is the following: > > > > > > facts: > > > The WGP as station role worgroup-bridge (default Cisco mode) works fine > > > directly to a internal 5508 controller > > > as IAPP works smoothly there. > > > > > > When the 5508 anchors to 4402 on a DMZ. The EtheroverIP tunnel makes the > > > game different. The DMZ controller > > > gives IP to the wired client behind the WGB but it doesn?t like to pass > > > traffic through since there is one MAC (the WGB) > > > asking for several IP?s to connect from the WGB. The IAPP is broken in > > > this situation. > > > > > > Luckily the solution is this CLI command on the DMZ anchor: > > > > > > config WGB vlan enable > > > > > > And traffic is passed through without more changes. > > > > > > This command does the following: > > > The DMZ Anchor says to the WGB. Give me a updated list of your clients > > and > > > I will pass them through as > > > normally I don?t like several IP?s to come from one association as I see > > > you by default. Thats why > > > I could?t list the wired cilent in my client table over the EtheroverIP > > > tunnel. > > > > > > Makes sense ? > > > > > > regards. Kristjan > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, please > > > visit www.ipexpert.com<http://www.ipexpert.com> > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > </archives/ccie_wireless/attachments/20120413/5a763601/attachment-0001.html> > > > > ------------------------------ > > > > _______________________________________________ > > CCIE_Wireless mailing list > > [email protected]<mailto:[email protected]> > > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > > > > > > End of CCIE_Wireless Digest, Vol 36, Issue 10 > > ********************************************* > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_wireless/attachments/20120415/642aebb6/attachment-0001.html> > > ------------------------------ > > _______________________________________________ > CCIE_Wireless mailing list > [email protected]<mailto:[email protected]> > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > > > End of CCIE_Wireless Digest, Vol 36, Issue 11 > *********************************************
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
