I failed the lab three times before passing and the second time I was in the same boat as you where I had everything working and thought for sure I had passed. My recommendation would be to write down everything that you encountered in the lab, even things that you think you know exactly how to do. Then rework the entire exam and test everything - again even the things that you think were easy and you understand. I was surprised to find out how many things I took for granted on how they worked and when I tested and ran debugs and tried to configure items in a different order etc they were different than I expected.
Hang in there and Good Luck!! .:|:.:|:. Kara Muessig, CCIE-Wireless #29572 | Consulting Systems Engineer | 512.791.2870 | [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Manolo Encelan Sent: Wednesday, April 25, 2012 2:23 AM To: sun dell; [email protected] Subject: Re: [OSL | CCIE_Wireless] CCIE_Wireless Digest, Vol 36, Issue 11 No worries man... just write all the items that you think you did wrong... im sure the you're next take will be a success!!! After the exam did the proctor inform you where you failed? So that you can review it. Cheers, Manolo S. Encelan Presales Engineer BT Al Saudia|P.O.Box 16828|Riyadh 11474|Saudi Arabia| Mob :+966555048119 | Fax: +966 1 476 2808 Email : [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of sun dell Sent: Wednesday, April 25, 2012 8:21 AM To: [email protected] Subject: Re: [OSL | CCIE_Wireless] CCIE_Wireless Digest, Vol 36, Issue 11 Failed the labv2 again, not sure where I have done wrong exactly, I am pretty sure I have everything worked, just not enough score, sigh! :( Zq The better you're serving, the better you'll be served > From: [email protected] > Subject: CCIE_Wireless Digest, Vol 36, Issue 11 > To: [email protected] > Date: Sun, 15 Apr 2012 12:00:03 -0400 > > Send CCIE_Wireless mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Wireless digest..." > > > Today's Topics: > > 1. Re: CCIE_Wireless Digest, Vol 36, Issue 10 (Raul Manzano) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 15 Apr 2012 10:50:20 +0200 > From: Raul Manzano <[email protected]> > To: [email protected] > Subject: Re: [OSL | CCIE_Wireless] CCIE_Wireless Digest, Vol 36, Issue > 10 > Message-ID: > <CAOZEa23GgNPkVawX1QNaiMDOW9qF5xzWmLXva4P=87p1v-q...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Thanks Kristjan for the answer, very interesting!!! > > Good work!!!! > > El 14 de abril de 2012 18:00, > <[email protected]>escribi?: > > > Send CCIE_Wireless mailing list submissions to > > [email protected] > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > > or, via email, send a message with subject or body 'help' to > > [email protected] > > > > You can reach the person managing the list at > > [email protected] > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of CCIE_Wireless digest..." > > > > > > Today's Topics: > > > > 1. WGP to Capwap WLC via anchor on DMZ - solution > > (Kristj?n ?lafur E?var?sson) > > 2. Re: WGP to Capwap WLC via anchor on DMZ - solution (Jason Boyers) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Fri, 13 Apr 2012 16:18:59 +0000 > > From: Kristj?n ?lafur E?var?sson <[email protected]> > > To: "[email protected]" > > <[email protected]> > > Subject: [OSL | CCIE_Wireless] WGP to Capwap WLC via anchor on DMZ - > > solution > > Message-ID: <2426A68554621145BDCFB71806B8FB6F1AB2E8B2@EXCH> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hey guys, > > > > The solution for my WGB - WLC foregin to WLC anchor is the following: > > > > facts: > > The WGP as station role worgroup-bridge (default Cisco mode) works fine > > directly to a internal 5508 controller > > as IAPP works smoothly there. > > > > When the 5508 anchors to 4402 on a DMZ. The EtheroverIP tunnel makes the > > game different. The DMZ controller > > gives IP to the wired client behind the WGB but it doesn?t like to pass > > traffic through since there is one MAC (the WGB) > > asking for several IP?s to connect from the WGB. The IAPP is broken in > > this situation. > > > > Luckily the solution is this CLI command on the DMZ anchor: > > > > config WGB vlan enable > > > > And traffic is passed through without more changes. > > > > This command does the following: > > The DMZ Anchor says to the WGB. Give me a updated list of your clients and > > I will pass them through as > > normally I don?t like several IP?s to come from one association as I see > > you by default. Thats why > > I could?t list the wired cilent in my client table over the EtheroverIP > > tunnel. > > > > Makes sense ? > > > > regards. Kristjan > > > > > > ------------------------------ > > > > Message: 2 > > Date: Fri, 13 Apr 2012 12:36:08 -0400 > > From: Jason Boyers <[email protected]> > > To: Kristj?n ?lafur E?var?sson <[email protected]> > > Cc: "[email protected]" > > <[email protected]> > > Subject: Re: [OSL | CCIE_Wireless] WGP to Capwap WLC via anchor on DMZ > > - solution > > Message-ID: > > <calo5k2tbe3crpq-aab3in1jxhs4uy6twjgslvlcw_cbz_tw...@mail.gmail.com <mailto:[email protected] om%0b> > > > > > Content-Type: text/plain; charset="iso-8859-1" > > > > Great work, Kristjan! > > > > Jason Boyers, CCIE #26024 (Wireless) > > Blog: netboyers.wordpress.com > > > > > > 2012/4/13 Kristj?n ?lafur E?var?sson <[email protected]> > > > > > Hey guys, > > > > > > The solution for my WGB - WLC foregin to WLC anchor is the following: > > > > > > facts: > > > The WGP as station role worgroup-bridge (default Cisco mode) works fine > > > directly to a internal 5508 controller > > > as IAPP works smoothly there. > > > > > > When the 5508 anchors to 4402 on a DMZ. The EtheroverIP tunnel makes the > > > game different. The DMZ controller > > > gives IP to the wired client behind the WGB but it doesn?t like to pass > > > traffic through since there is one MAC (the WGB) > > > asking for several IP?s to connect from the WGB. The IAPP is broken in > > > this situation. > > > > > > Luckily the solution is this CLI command on the DMZ anchor: > > > > > > config WGB vlan enable > > > > > > And traffic is passed through without more changes. > > > > > > This command does the following: > > > The DMZ Anchor says to the WGB. Give me a updated list of your clients > > and > > > I will pass them through as > > > normally I don?t like several IP?s to come from one association as I see > > > you by default. Thats why > > > I could?t list the wired cilent in my client table over the EtheroverIP > > > tunnel. > > > > > > Makes sense ? > > > > > > regards. Kristjan > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, please > > > visit www.ipexpert.com > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > www.PlatinumPlacement.com > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > </archives/ccie_wireless/attachments/20120413/5a763601/attachment-0001.h tml> > > > > ------------------------------ > > > > _______________________________________________ > > CCIE_Wireless mailing list > > [email protected] > > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > > > > > > End of CCIE_Wireless Digest, Vol 36, Issue 10 > > ********************************************* > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_wireless/attachments/20120415/642aebb6/attachment-0001.h tml> > > ------------------------------ > > _______________________________________________ > CCIE_Wireless mailing list > [email protected] > http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless > > > End of CCIE_Wireless Digest, Vol 36, Issue 11 > *********************************************
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
