Here are some notes about the Office Extend 600 AP from the config guide: http://www.cisco.com/en/US/products/ps11579/products_tech_note09186a0080b7f10e.shtml
Office Extend AP-600 Configuration Steps The Cisco Aironet 600 Series OEAP will connect to the WLC as a Local Mode Access Point. Note: Monitor, H-REAP, Sniffer, Rogue Detection, Bridge and SE-Connect modes are not supported on the 600 Series and are not configurable. Note: Cisco Aironet 600 Series OEAP functionality in the 1040, 1130, 1140 and 3502i Series Access Points requires configuring the APs for Hybrid REAP (H-REAP) and setting the sub-mode for the AP to Cisco Aironet 600 Series OEAP. This is not done with the 600 Series because it uses local mode and cannot be altered. I don't have an 600 AP to try this out on but I hope the helps. Tracy -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, August 08, 2012 12:00 PM To: [email protected] Subject: CCIE_Wireless Digest, Vol 40, Issue 3 Send CCIE_Wireless mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Wireless digest..." Today's Topics: 1. Office extend 600 settings grayed out (Kristj?n ?lafur E?var?sson) ---------------------------------------------------------------------- Message: 1 Date: Wed, 8 Aug 2012 15:40:42 +0000 From: Kristj?n ?lafur E?var?sson <[email protected]> To: "[email protected]" <[email protected]> Subject: [OSL | CCIE_Wireless] Office extend 600 settings grayed out Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" Hi all, has anyone fiddled with OE 600 APs ? I have done OE on all other APs that support OE but the 600 joins but I cant configure HREAP and OE mode because the settings ate grayed out from WLC. I have WlC 2504 and 7.2 code . The only difference on the AP list the 600 says UP but the others. (1230, 1140) say reg.. Sent from Samsung Mobile -------- Original message -------- Subject: CCIE_Wireless Digest, Vol 40, Issue 2 From: "[email protected]" <[email protected]> To: "[email protected]" <[email protected]> CC: Send CCIE_Wireless mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Wireless digest..." Today's Topics: 1. Re: wireless site survey tool / software (Waqas Akhtar) 2. wireless site survey tool / software (Kristj?n ?lafur E?var?sson) ---------------------------------------------------------------------- Message: 1 Date: Sat, 4 Aug 2012 03:04:30 +0300 From: Waqas Akhtar <[email protected]> To: waheed Ahmed <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: [OSL | CCIE_Wireless] wireless site survey tool / software Message-ID: <CAHr4nif_9=cdnbmhmdzufvdsg2h-4jlz+naephtakhqxg3s...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" the best tools according to my experience are from Airmagnet... you can use their Survey Pro product following is the link: http://www.flukenetworks.com/enterprise-network/wireless-network/AirMagnet-Survey On Thu, Aug 2, 2012 at 2:11 PM, waheed Ahmed <[email protected]> wrote: > Dear Guys, > > I want to that which software can be used for Wireless Site Survey as > we want to deploy Wireless network on 10 floor building. Is their any > software available from Cisco or any freeware software for this kind of site > survey. > > > > > > With Regards > Waheed Ahmed > +971-55-7720310 > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com<http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> > > -- Waqas Akhtar Mobile: +966-5688 97268 -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_wireless/attachments/20120804/5b86f3cb/attachment-0001.html> ------------------------------ Message: 2 Date: Sat, 4 Aug 2012 00:06:28 +0000 From: Kristj?n ?lafur E?var?sson <[email protected]> To: "[email protected]" <[email protected]> Subject: [OSL | CCIE_Wireless] wireless site survey tool / software Message-ID: <2426A68554621145BDCFB71806B8FB6F1F8C501D@EXCH-FAILOVER01.Sensanet.local> Content-Type: text/plain; charset="iso-8859-1" Hi Waheed. This depends very much if you plan to do a active or passive site survey. Some years ago I used to use Cisco PCIMCA Aironet Card with the Cisco Site survey utility. That had passive and active options. But today, I mostly do passive site surveys. As the customer usually doesnt know what he wants exept for coverage :) unless there is a requirement for voice over wireless. I tend to use the Cisco wifi phone site survey utility, since it is generally a better idea to use and test the clients that will actually be using the network. If Cisco phones aren?t planned, there might be a need for a smartphone site survey program. in both cases I have been quite happy with Inssider from metageek http://www.metageek.net/support/downloads/ its a passive survey tool but it is free and it works for smartphones aswell. (search for wifi analyzer in android market for example) in this case I have just printed out a floor plan of the project and used it to mark down signal strength and quality. it is some work but you tend to get quicker by time. Some more advanced players reading thist post can probably tell you more about tools such as AirMagnet or such tools that can have floor building added to it and some really cool automation. But this is of course not free and will take you some time to get the hang of it. I would like to add, that I recently purchaced a 1400$ kit called Surveyor. It is comes in a pelican case, packed down carrier, pole and a battery pack with power inline to your site survey AP. This can be taken with you on the flight aswell and doesn?t take much space and is set up in 5 minutes and packed in less. This has dramitcally decreased the survey time for me and I can highly reccomend it. Even though it costs money you will get it back really quickly by charging your customers for its use. Thats what I did and after 5-6 surveys it already has paid off. Take a look at: http://www.castertray.com/surveyor.html I even used this in a warehouse, where the battery pack was mounted on a forklifter and the forklifter moved around with the anntennas during the survey. Really cool stuff and makes the survey more fun, as it really wasn?t before with all the hazzle of getting power, setting something together yourself e.t.c regards, Kristjan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: 2. ?g?st 2012 16:00 To: [email protected] Subject: CCIE_Wireless Digest, Vol 40, Issue 1 Send CCIE_Wireless mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Wireless digest..." Today's Topics: 1. wireless site survey tool / software (waheed Ahmed) ---------------------------------------------------------------------- Message: 1 Date: Thu, 2 Aug 2012 04:11:26 -0700 (PDT) From: waheed Ahmed <[email protected]> To: "[email protected]" <[email protected]> Subject: [OSL | CCIE_Wireless] wireless site survey tool / software Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" Dear Guys, I want to that which software can be used for Wireless Site Survey as we want to deploy Wireless network on 10 floor building. Is their any software available from Cisco or any freeware software for this kind of site survey. ? With Regards Waheed Ahmed +971-55-7720310 -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_wireless/attachments/20120802/683fc5e2/attachment-0001.html> ------------------------------ _______________________________________________ CCIE_Wireless mailing list [email protected] http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless End of CCIE_Wireless Digest, Vol 40, Issue 1 ******************************************** ------------------------------ _______________________________________________ CCIE_Wireless mailing list [email protected] http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless End of CCIE_Wireless Digest, Vol 40, Issue 2 ******************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_wireless/attachments/20120808/20cac8d4/attachment-0001.html> ------------------------------ _______________________________________________ CCIE_Wireless mailing list [email protected] http://onlinestudylist.com/cgi-bin/mailman/listinfo/ccie_wireless End of CCIE_Wireless Digest, Vol 40, Issue 3 ******************************************** _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
