Hi Can you link me to some Cisco doc about this ?
Thanks ! J On 2012-10-04, at 23:15, Flavio Correa <[email protected]> wrote: > Hi, > > I was studying about TxBeamforming configuration and I saw that some people > recommend to enable the TxBeamforming using the GUI or CLI (config 802.11a > beamforming global enable) as well as the 3 AP antennas (A,B,C) as MUST. > > In theory TxBeamforming should not require the antenna C (middle one is only > Rx) to be used since it´s a TX technology and it should only require the > radios A and B. If the request was about MRC with optimum gain than I will > agree that the 3 "antennas" (radio chains) should be enabled to "hear" the > client with the 3 receivers. > > Any comments about it? > > I´m afraid of to get this kind of question that you can´t really verify if > it´s working and the configuration that I saw people recommending does not > look correct. > > BR, > FC > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
