It is true that txbeamforming isTX technology but am yourself how it work...there is an algorithm that calculates the TX timing out of the antennas to intelligently "merge" the signals at the client in phase. The signals arriving in phase increases the overall strength and improves the signal. It's time is determined based on received signal from a particular client so RX is also important in TX beamforming.
Maybe some other experts will have additional details to add. J On Thursday, October 4, 2012, Flavio Correa wrote: > Hi, > > I was studying about TxBeamforming configuration and I saw that some > people recommend to enable the TxBeamforming using the GUI or CLI (config > 802.11a beamforming global enable) as well as the 3 AP antennas (A,B,C) as > MUST. > > In theory TxBeamforming should not require the antenna C (middle one is > only Rx) to be used since it´s a TX technology and it should only require > the radios A and B. If the request was about MRC with optimum gain than I > will agree that the 3 "antennas" (radio chains) should be enabled to "hear" > the client with the 3 receivers. > > Any comments about it? > > I´m afraid of to get this kind of question that you can´t really verify if > it´s working and the configuration that I saw people recommending does not > look correct. > > BR, > FC > ______________________________**_________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
