Hi Jason, Sorry, I didn't configured any extra config on 1121 to authenticate with 1142.*(Also, your configuration doesn't show how the 1121 is actually sending credentials to the 1142)*.
Could you help me with the config what to be configured to authencticate with Root device. Thanks Kumar G On Mon, Nov 19, 2012 at 10:35 PM, Jason Boyers <[email protected]> wrote: > The parent should never be a BVI - only radios can be parents. Also, have > you tried to associate without using encryption and without the mac-list on > the 1142? That is always the first step - get the association to work, > then add security to that. Otherwise, you run into the issue of not > knowing what is causing the problem - the wireless component or the > security component. Also, your configuration doesn't show how the 1121 is > actually sending credentials to the 1142. That needs to be configured, and > the configuration will depend on the EAP type used. > > Jason Boyers, CCIE #26024 (Wireless) > Blog: netboyers.wordpress.com > > > On Mon, Nov 19, 2012 at 9:19 AM, Kumar Gollapudi <[email protected]>wrote: > >> Hi, >> >> There is a challenge in configuring Cisco Access Point 1121 into Repeater >> Mode with Root Station AP 1142. The Root station has two Radio's 0 & 1 (2.4 >> Ghz & 5.Ghz). We configurfed to associate the Cisco AP 1121 on both Radio >> Stations & BVI1. But its trying to assoicate with 1142 with lot of error's. >> >> '%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Not >> specified parent >> >> %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response >> >> %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd >> response from >> >> Actually the Root Stations has been configured with MAC & AD based >> authenticatoin to associate the client devices(laptops). Looking for your >> valuable suggestions on the issue. >> >> >> >> >> >> *On Root Station: (Standalone Cisco 1142 Access Point)* >> >> >> >> dot11 ssid AC-CORP-WIFI-IND >> >> authentication open eap eap_methods1 >> >> authentication network-eap eap_methods1 >> >> authentication key-management wpa >> >> >> >> interface Dot11Radio0 >> >> no ip address >> >> no ip route-cache >> >> ! >> >> encryption mode ciphers aes-ccm >> >> ! >> >> ssid XXXXXXX >> >> ! >> >> speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0 >> >> station-role root >> >> dot1x reauth-period 3 >> >> bridge-group 1 >> >> bridge-group 1 subscriber-loop-control >> >> bridge-group 1 block-unknown-source >> >> no bridge-group 1 source-learning >> >> no bridge-group 1 unicast-flooding >> >> bridge-group 1 spanning-disabled >> >> >> >> dot11 association mac-list xxxx >> >> ip radius source-interface BVI1 >> >> >> >> >> >> *On Repeater Device: (Cisco Access 1121) >> * >> >> >> >> dot11 ssid XXXXXXXXXX >> >> authentication open eap eap_methods1 >> >> authentication network-eap eap_methods1 >> >> authentication key-management wpa >> >> infrastructure-ssid optional >> >> >> >> >> >> >> >> >> >> interface Dot11Radio0 >> >> no ip address >> >> no ip route-cache >> >> ! >> >> encryption mode ciphers aes-ccm >> >> ! >> >> ssid AC-CORP-WIFI-IND >> >> ! >> >> speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0 >> >> station-role repeater >> >> dot1x reauth-period 3 >> >> parent 1 xxxx.xxxx.xxxx (BVI1) >> >> parent 2 xxxx.xxxx.xxxx (Dot11Radio0) >> >> parent 3 xxxx.xxxx.xxxx (Dot11Radio1) >> >> bridge-group 1 >> >> bridge-group 1 subscriber-loop-control >> >> bridge-group 1 block-unknown-source >> >> no bridge-group 1 source-learning >> >> no bridge-group 1 unicast-flooding >> >> bridge-group 1 spanning-disabled >> Thanks >> Kumar G >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
