Hi, There is a challenge in configuring Cisco Access Point 1121 into Repeater Mode with Root Station AP 1142. The Root station has two Radio's 0 & 1 (2.4 Ghz & 5.Ghz). We configurfed to associate the Cisco AP 1121 on both Radio Stations & BVI1. But its trying to assoicate with 1142 with lot of error's.
'%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Not specified parent %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response from Actually the Root Stations has been configured with MAC & AD based authenticatoin to associate the client devices(laptops). Looking for your valuable suggestions on the issue. *On Root Station: (Standalone Cisco 1142 Access Point)* dot11 ssid AC-CORP-WIFI-IND authentication open eap eap_methods1 authentication network-eap eap_methods1 authentication key-management wpa interface Dot11Radio0 no ip address no ip route-cache ! encryption mode ciphers aes-ccm ! ssid XXXXXXX ! speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root dot1x reauth-period 3 bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled dot11 association mac-list xxxx ip radius source-interface BVI1 *On Repeater Device: (Cisco Access 1121) * dot11 ssid XXXXXXXXXX authentication open eap eap_methods1 authentication network-eap eap_methods1 authentication key-management wpa infrastructure-ssid optional interface Dot11Radio0 no ip address no ip route-cache ! encryption mode ciphers aes-ccm ! ssid AC-CORP-WIFI-IND ! speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role repeater dot1x reauth-period 3 parent 1 xxxx.xxxx.xxxx (BVI1) parent 2 xxxx.xxxx.xxxx (Dot11Radio0) parent 3 xxxx.xxxx.xxxx (Dot11Radio1) bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled Thanks Kumar G
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
