Hey Kyle - I've tried it on two separate controllers and AP's. I'm getting the same results with a 1242 / 3502 and 5508 / 2504. And yes, 2504 does have DTLS.
From: Kyle Nielsen <[email protected]<mailto:[email protected]>> Date: Thursday, February 13, 2014 10:06 AM To: Jay Killion <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: RE: OEAP Jay, What AP model and Controller are you using for this test? WLC needs to be a 5508 and a newer AP model such as the 1131 or newer. Kyle From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Jay Killion (jakillio) Sent: Thursday, February 13, 2014 10:33 AM To: [email protected]<mailto:[email protected]> Subject: [OSL | CCIE_Wireless] OEAP So I'm sure I'm missing something stupid right now, but I need a point in the right direction. I want to setup an AP in OE, which I've done in my lab before. But this time, when I convert the AP to H-Reap and let it reboot, I get the "H-REAP" tab for the AP but the section for Office Extend is missing. It has "VLAN Support" and "HREAP Group Name", but then nothing else on the page. I've read through the config guides, watched the IPX VoD, and checked multiple other "walkthroughs" to see what I'm missing. But each time, I just see the AP converted to H-REAP, reboot, and then check the box in the H-REAP tab (which is how I remember configuring it previously as well). What am I missing that's keeping the option from even appearing? Thanks - Jay Killion, CCIE #17873 R/S
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
