That's your issue. It is only on option on the internal antenna office AP models. If you have the 3502i, you'd get the option for OE.
Regards, Jeff Rensink : Sr Instructor : iPexpert <http://www.ipexpert.com/> CCIE # 24834 :: Wireless / R&S :: World-Class Cisco Certification Training Direct: +1.810.326.1444 :: Free Videos <http://www.youtube.com/ipexpertinc> :: Free Training / Product Offerings <http://www.facebook.com/ipexpert> :: CCIE Blog <http://blog.ipexpert.com/> :: Twitter <http://www.twitter.com/ipexpert> On Thu, Feb 13, 2014 at 10:11 AM, Jay Killion (jakillio) <[email protected] > wrote: > Hey Kyle - > > I've tried it on two separate controllers and AP's. I'm getting the > same results with a 1242 / 3502 and 5508 / 2504. And yes, 2504 does have > DTLS. > > > > From: Kyle Nielsen <[email protected]> > Date: Thursday, February 13, 2014 10:06 AM > To: Jay Killion <[email protected]>, "[email protected]" > <[email protected]> > Subject: RE: OEAP > > Jay, > > > > What AP model and Controller are you using for this test? > > > > WLC needs to be a 5508 and a newer AP model such as the 1131 or newer. > > > > Kyle > > > > *From:* [email protected] [ > mailto:[email protected]<[email protected]>] > *On Behalf Of *Jay Killion (jakillio) > *Sent:* Thursday, February 13, 2014 10:33 AM > *To:* [email protected] > *Subject:* [OSL | CCIE_Wireless] OEAP > > > > So I'm sure I'm missing something stupid right now, but I need a point in > the right direction. I want to setup an AP in OE, which I've done in my > lab before. But this time, when I convert the AP to H-Reap and let it > reboot, I get the "H-REAP" tab for the AP but the section for Office Extend > is missing. It has "VLAN Support" and "HREAP Group Name", but then nothing > else on the page. > > > > I've read through the config guides, watched the IPX VoD, and checked > multiple other "walkthroughs" to see what I'm missing. But each time, I > just see the AP converted to H-REAP, reboot, and then check the box in the > H-REAP tab (which is how I remember configuring it previously as well). > What am I missing that's keeping the option from even appearing? > > > > Thanks - > > > > Jay Killion, CCIE #17873 R/S > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
