Hi Adam,
We had an interesting discussion on the matter of QoS to be trusted for a
HREAP. You can check here:
https://learningnetwork.cisco.com/thread/65035?start=0&tstart=0
The idea was to say that you have no better solution. All depends on what you
intend to do with QoS. It's really up to you.
As there is no recommendation from Cisco on this point, during the lab you are
free to use what you want, unless they specify you should use one.
They could say for example you must preserve control packets marking. In that
case you should trust dscp.
Andre.
—
Sent from Mailbox
On Sat, May 17, 2014 at 9:20 PM, ahugheswireless
<[email protected]> wrote:
> If you convert an LAP to HREAP and you already had it set for mls qos trust
> dscp would you have to change to mls qos trust cos because you are putting
> it into trunk mode I noticed on the practice labs you left it to dscp.
> Just wondering?
> Thanks,
> Adam
_______________________________________________
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
