> So I've got the machine being quiet now (no buzz).  And I've confirmed the 
> unit does 
> not try to engage the motor unless switched to Line or Local mode.  The 
> second you
> turn the switch, the motor does about a 1/4 turn and then there's a visible 
> spark from
> the bottom of the fuse holder.  So I'm guessing this must be caps or 
> something 
> drawing too much power somewhere.

I assume this is with a good fuse in the holder. Without it, the motor should 
not be
powered at all. 

I would try removing the belt so as to remove the load from the motor. And then 
check the motor capacitor and starter relay (if there is one).

-tony

Reply via email to