On 12/2/16 8:29 AM, Jon Elson wrote:
On 12/01/2016 01:27 PM, Josh Dersch wrote:
but what I failed to notice is that three of
the "pins" (for the X, Y and Blank signals) are actually tiny coaxial
connectors that fit within the Winchester housing (i.e. they're the same
diameter as a Winchester pin).
These pins MIGHT be compatible with AMP pins for the "M" series of
connectors. If so, I have some of these pins at work that we will
likely never use. If you can send a photo of the end you have I can
see if it looks like it might work.
Jon
Here's a pic of a real Imlac video cable (not mine):
http://yahozna.dyndns.org/scratch/imlac/cable1.jpg
Pins P, J and R are the coaxial pins.
And here's a pic of the male side:
http://yahozna.dyndns.org/scratch/imlac/cable2.jpg
If you do have any that look like they will work, let me know. I think
I may have tracked down the part (thanks to those here and a fellow who
responded off-list, see page 15 of
https://3o9g5a3i56xc3au70w1rfrdv-wpengine.netdna-ssl.com/wp-content/uploads/2016/09/C009RevD_StdDenRec.pdf).
Thanks,
Josh
