On Tue, Jan 17, 2023 at 8:39 AM Bill Degnan <[email protected]> wrote:
> I am working to understand a TU56 in my possession that came from an > unknown environment. A connecting cable that came with it reads "PDP9" on > one end so I wondered if this is actually associated with the TU56 or just > sitting in the same box before the TU56 came to me. I have read here: > > https://gunkies.org/wiki/TU56_DECtape_Transport > > That one can have a TU56 with a M531 or a G742 to serve as a bus > converter. THe M531 is for situations where one has a negative logic > controller and the G742 is for when one has a positive logic controller. > > Jumping a few steps ahead, if the TU56 was attached to a PDP-9, would it > use a G742 if one tried to attach a TU56 to it? I feel as if the G742 > would be used if the TU56 was intended for a PDP8 and not a PDP11, right? > > I searched the web and will continue to research but I thought I'd ask > experts here. No, I don't use ChatGPT. > > Bill > First of all, here is a set of pre-restoration pics of the TU56 I am cleaning up and trying to understand: https://www.vintagecomputer.net/digital/TU56/index.cfm?sort=name&order=DESC I found a good general description of how the negative / positive relates to the PDP-8 and how peripherals fit into the picture. https://homepage.cs.uiowa.edu/~dwjones/pdp8/models/ "The "negibus" or negative logic I/O bus used -3 and 0 volt logic levels in 92 ohm coaxial cable" - a M531 would be used if attaching to a computer with a negative bus. A G742 indicates the computer using the TU56 had some form of positive logic bus. The positive I/O bus, or posibus, was a 100 ohm bus clamped between 0 and 3 volts with TTL drivers and receivers. BUT - The cable that connects the TU56 to the external peripheral possibly appears to convert the posibus to a negibus as well as data. So I am thinking the presence of a G742 does not alone indicate the computer using the TU56. Note the 18 connectors: https://www.vintagecomputer.net/digital/TU56/TU56_PDP9-connector.png I think a PDP-9 and earlier PDP8's were negative logic computers, so it's possible that this TU56 was used with a negative logic computer, the PDP-9 despite the G742, given 1) The 18-pin bus adapter-ing on the other end of the TU56 positive bus 2) THe "PDP9" printed on the adapter. 3) The other side of the cable reads "TC02 E&F" (I believe). I know PDP-9's attached to TU55's, but the TU56 was not invented yet. TC02? http://www.bitsavers.org/www.computer.museum.uq.edu.au/pdf/DEC-00-HRTC-D%20TU56%20DECtape%20Transport%20Maintenance%20Manual.pdf See page 22 (1) For a TU56M or TU56MH Transport: controller-to-transport information cable = 70-06412, transport-totransport (other TU56 or TU56H in system) information cable = 74-5152. See Note 2 for TU56M or TU56MH connected to a TD8/e Controller. (2) When a TU56M or TU56MH is connected to a TDa TD8/e Controller, only one 70-08447 cable is used for both commands and information. This cable has both a single-height and a double-height connector module on the termination end. Insert the single-height connector into slots A061 A07 and the double-height connector into slots AB 1 01 AB I I. Bill
