On Tue, Jan 17, 2023 at 10:17 AM Bill Degnan <[email protected]> wrote:

> On Tue, Jan 17, 2023 at 8:39 AM Bill Degnan <[email protected]> wrote:
>
>> I am working to understand a TU56 in my possession that came from an
>> unknown environment.  A connecting cable that came with it reads "PDP9" on
>> one end so I wondered if this is actually associated with the TU56 or just
>> sitting in the same box before the TU56 came to me.  I have read here:
>>
>> https://gunkies.org/wiki/TU56_DECtape_Transport
>>
>> That one can have a TU56 with a M531 or a G742 to serve as a bus
>> converter.  THe M531 is for situations where one has a negative logic
>> controller and the G742 is for when one has a positive logic controller.
>>
>> Jumping a few steps ahead, if the TU56 was attached to a PDP-9, would it
>> use a G742 if one tried to attach a TU56 to it?  I feel as if the G742
>> would be used if the TU56 was intended for a PDP8 and not a PDP11, right?
>>
>> I searched the web and will continue to research but I thought I'd ask
>> experts here.  No, I don't use ChatGPT.
>>
>> Bill
>>
>
> <snip>
>
>

>
> I consolidated my findings here:
https://vintagecomputer.net/browse_thread.cfm?id=788

Basically think that the TU56 can connect to a PDP-9 as long as the correct
bus connector is used.  There is documentation how to attach a PDP-9 to a
TU55, which should be the same as the TU56 where it counts in this
situation.  Because the 9 is a negative logic system, a M531 would be used
to connect with a (not sure PN) cable OR you'd use a G742 bus connector and
a W850 adapter + cable.

So yes, it's possible that my TU56 was attached to a PDP-9 on the other
end, at least for some period of time.


>
> Bill
>

Reply via email to