> On Jan 17, 2023, at 10:17 AM, Bill Degnan via cctalk <[email protected]>
> wrote:
>
> ...
> I found a good general description of how the negative / positive relates
> to the PDP-8 and how peripherals fit into the picture.
> https://homepage.cs.uiowa.edu/~dwjones/pdp8/models/
>
> "The "negibus" or negative logic I/O bus used -3 and 0 volt logic levels in
> 92 ohm coaxial cable" - a M531 would be used if attaching to a computer
> with a negative bus. A G742 indicates the computer using the TU56 had some
> form of positive logic bus.
> The positive I/O bus, or posibus, was a 100 ohm bus clamped between 0 and 3
> volts with TTL drivers and receivers.
Interesting to see the terms positive and negative logic used this way. I'm
used to a different usage, where "negative" logic simply means the lower (less
positive) voltage is used to represent the boolean value "true" (1) rather than
"false" (0) as it does for "positive" logic. For example, the CDC 6000 series
machines are "negative logic" in that sense: they represent boolean true as 0
volts and boolean false as +6 volts.
paul