Hello,
The error message comes from cdrecord, and I can't do much better than guess
what it means, I haven't seen that sense code error before... I'm CC:ing the
reply to the cdwrite mailinglist; someone there probably knows more (please cc
replies to the orig author, [EMAIL PROTECTED]).
On Thu, Oct 05, 2000 at 12:26:31PM +0000, Dirk Busse wrote:
> a goddamn little Win**** prog named nero5 , I just wanted to use I to compare
> Speed since I think my Spinbird 4x4x32x was a little bit too slow, I get the
> following ErrorMessage:
>
>
> Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'IDE-CD '
> Identifikation : 'R/RW 4x4x32 '
> Revision : '1.3B'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1572864 = 1536 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data unknown length padsize: 30 KB
> Lout start: 0 MB (00:02/00) = 0 sectors
> Current Secsize: -1
> ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> Disk sub type: 3
> ATIP start of lead in: -11323 (97:31/02)
> ATIP start of lead out: 336225 (74:45/00)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 22
> Manufacturer: Ritek Co.
> Starting to write CD/DVD at speed 4 in dummy mode for single session.
> /usr/bin/cdrecord: WARNING: Track size unknown. Data may not fit on disk.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Track 01: 0 MB written.CDB: 2A 00 00 00 00 00 00 00 10 00
> Sense Bytes: F0 00 05 00 00 00 00 13 00 00 00 00 63 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru 0x0
> Sense flags: Blk 0 (valid)
> cmd finished after 0.007s timeout 40s
> /usr/bin/cdrecord: Eingabe-/Ausgabefehler. write_g1: scsi sendcmd: retryable
> error
> status: 0x2 (CHECK CONDITION)
>
> write track data: error after 0 bytes
> Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00
> Writing time: 5.793s
> WARNING: Some drives don't like fixation in dummy mode.
> /usr/bin/cdrecord: fifo had 25 puts and 1 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
>
> Well, I tried it with Images, audio, on the fly but nothing worked.
> I even tried a Firmware-update but nada, nothing happened. I know it is nothing
> related with
> your prog but I don't know what to to.... Please be that kind and answer if you
> can.
--
Jonas Munsin <[EMAIL PROTECTED]> KeyID: 1024/98A0C47D
Key fingerprint 9F 69 9D 96 80 DD 8E D0 D8 A0 30 66 F9 55 63 B4
Debian GNU/Linux Developer comp.science student @ �bo Akademi University
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
