>From: Jonas Munsin <[EMAIL PROTECTED]>
1) I canot give support for old versions
2) The error massage does not contain enough information.
It has either not been created with cdrecord -v or has been edited.
For this reason, It is not possible to guess for a reason.
>The error message comes from cdrecord, and I can't do much better than guess
>what it means, I haven't seen that sense code error before... I'm CC:ing the
>reply to the cdwrite mailinglist; someone there probably knows more (please cc
>replies to the orig author, [EMAIL PROTECTED]).
>On Thu, Oct 05, 2000 at 12:26:31PM +0000, Dirk Busse wrote:
>> a goddamn little Win**** prog named nero5 , I just wanted to use I to compare
>> Speed since I think my Spinbird 4x4x32x was a little bit too slow, I get the
>> following ErrorMessage:
>>
>>
>> Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
>> TOC Type: 1 = CD-ROM
>> scsidev: '0,0,0'
>> scsibus: 0 target: 0 lun: 0
>> Using libscg version 'schily-0.1'
>> atapi: 1
>> Device type : Removable CD-ROM
>> Version : 0
>> Response Format: 1
>> Vendor_info : 'IDE-CD '
>> Identifikation : 'R/RW 4x4x32 '
>> Revision : '1.3B'
>> Device seems to be: Generic mmc CD-RW.
>> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>> Driver flags : SWABAUDIO
>> Drive buf size : 1572864 = 1536 KB
>> FIFO size : 4194304 = 4096 KB
>> Track 01: data unknown length padsize: 30 KB
>> Lout start: 0 MB (00:02/00) = 0 sectors
>> Current Secsize: -1
>> ATIP info from disk:
>> Indicated writing power: 5
>> Is not unrestricted
>> Is not erasable
>> Disk sub type: 3
>> ATIP start of lead in: -11323 (97:31/02)
>> ATIP start of lead out: 336225 (74:45/00)
>> Disk type: Long strategy type (Cyanine, AZO or similar)
>> Manuf. index: 22
>> Manufacturer: Ritek Co.
>> Starting to write CD/DVD at speed 4 in dummy mode for single session.
>> /usr/bin/cdrecord: WARNING: Track size unknown. Data may not fit on disk.
>> Waiting for reader process to fill input buffer ... input buffer ready.
>> Track 01: 0 MB written.CDB: 2A 00 00 00 00 00 00 00 10 00
>> Sense Bytes: F0 00 05 00 00 00 00 13 00 00 00 00 63 00 00 00
>> Sense Key: 0x5 Illegal Request, Segment 0
>> Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru 0x0
>> Sense flags: Blk 0 (valid)
>> cmd finished after 0.007s timeout 40s
>> /usr/bin/cdrecord: Eingabe-/Ausgabefehler. write_g1: scsi sendcmd: retryable
>> error
>> status: 0x2 (CHECK CONDITION)
>>
>> write track data: error after 0 bytes
>> Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00
>> Writing time: 5.793s
>> WARNING: Some drives don't like fixation in dummy mode.
>> /usr/bin/cdrecord: fifo had 25 puts and 1 gets.
>> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>>
>>
>> Well, I tried it with Images, audio, on the fly but nothing worked.
>> I even tried a Firmware-update but nada, nothing happened. I know it is nothing
>> related with
>> your prog but I don't know what to to.... Please be that kind and answer if you
>> can.
>--
>Jonas Munsin <[EMAIL PROTECTED]> KeyID: 1024/98A0C47D
>Key fingerprint 9F 69 9D 96 80 DD 8E D0 D8 A0 30 66 F9 55 63 B4
>Debian GNU/Linux Developer comp.science student @ �bo Akademi University
>--
>To UNSUBSCRIBE, email to [EMAIL PROTECTED]
>with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
