On Mon, Oct 17, 2016 at 6:16 PM, Nick Fisk <[email protected]> wrote:
> Did you also set /check the c-states, this can have a large impact as well?
Hi Nick. I did try intel_idle.max_cstate=0, and I've got quite a
significant improvement as attached below. Thanks for this advice!
This is still with DIRECT=1, SYNC=1, BS=4k, RW=WRITE.
I wanted also to ask you about Numa. Some argue it should be disabled
for high performance. My hosts are Dual Socket, 2x2630v4 2.2Ghz. Do
you have any suggestions around whether enable or disable numa and
what would be the Impact? Thx will
simple-write-62: (groupid=14, jobs=62): err= 0: pid=2133: Thu Oct 20
12:47:58 2016
write: io=1213.8MB, bw=41421KB/s, iops=10355, runt= 30006msec
clat (msec): min=2, max=81, avg= 5.99, stdev= 2.72
lat (msec): min=2, max=81, avg= 5.99, stdev= 2.72
clat percentiles (usec):
| 1.00th=[ 2864], 5.00th=[ 3184], 10.00th=[ 3376], 20.00th=[ 3696],
| 30.00th=[ 3984], 40.00th=[ 4576], 50.00th=[ 6048], 60.00th=[ 6688],
| 70.00th=[ 7264], 80.00th=[ 7712], 90.00th=[ 8640], 95.00th=[ 9920],
| 99.00th=[12480], 99.50th=[13248], 99.90th=[38656], 99.95th=[41728],
| 99.99th=[81408]
bw (KB /s): min= 343, max= 1051, per=1.62%, avg=669.64, stdev=160.04
lat (msec) : 4=30.01%, 10=65.31%, 20=4.53%, 50=0.12%, 100=0.02%
cpu : usr=0.04%, sys=0.54%, ctx=636287, majf=0, minf=1905
IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
issued : total=r=0/w=310721/d=0, short=r=0/w=0/d=0
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
