Howie Hamlin wrote: > I have several PCs that have ATX MBs that I need to be able to turn off/on remotely. > I have an APC Master Switch for > this purpose. However, when I remove the power from these systems and reapply, the >systems do not reboot. I did some > reading up on the systems and found that the 5 volt power is always applied and the >12 volt power is not applied when > the system is in an off state. The motherboard grounds one of the PS leads when it >wants to turn on. So, I hard-wired > the ground to that lead and now the sysytem power comes on when I plug it in. >However, the system still will not reboot > unless the MB gets a momentary closure on the leads that go to the power switch. >The system uses Award BIOS, BTW.
On any Award BIOS I know it is just a setting in the BIOS itself. Jochem ______________________________________________________________________ Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
