What motherboard is it? At 11:18 AM 7/3/2002 -0400, you wrote: >I couldn't find the setting...if you know which one, I would appreciate it... > >I have APM set off currently, BTW. > >Thanks, > >Howie > >----- Original Message ----- >From: "Jochem van Dieten" <[EMAIL PROTECTED]> >To: "CF-Community" <[EMAIL PROTECTED]> >Sent: Wednesday, July 03, 2002 11:14 AM >Subject: Re: Rebooting an ATX machine upon power-up > > > > Howie Hamlin wrote: > > > I have several PCs that have ATX MBs that I need to be able to turn > off/on remotely. I have an APC Master Switch >for > > > this purpose. However, when I remove the power from these systems > and reapply, the systems do not reboot. I did >some > > > reading up on the systems and found that the 5 volt power is always > applied and the 12 volt power is not applied >when > > > the system is in an off state. The motherboard grounds one of the PS > leads when it wants to turn on. So, I >hard-wired > > > the ground to that lead and now the sysytem power comes on when I > plug it in. However, the system still will not >reboot > > > unless the MB gets a momentary closure on the leads that go to the > power switch. The system uses Award BIOS, BTW. > > > > On any Award BIOS I know it is just a setting in the BIOS itself. > > > > Jochem > > > > > ______________________________________________________________________ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
