Clean out some space for the logs, move out the old ones so the new logs will start from scratch and restart the server. If it jumps to 99% again, wait a minute to see if it stops and if it doesn't, pull it down again. Then take the newly generated CF logs AND the webserver logs for that minute and look through them. See what templates were called. I'm betting that you have a call to an outside resource (like a DB) that's causing this.
> Ok, I come in today and find that CF 5 server is running at 99% CPU. I log into the >server and finally get it to shut down. When I restarted CF it jumps right back to >99% CPU. > > I also screwed up and didn't get to pull the log files off the server before I left >for the weekend so the disk was full and couldn't write any errors to the log file. > > So this is my question. Where should I start looking to find out what the heck is >going on? > > Phillip Broussard > Tracker Marine Group > 417-873-5957 > > > ______________________________________________________________________ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
