I would check possible permission with the service. Since you can login change the service start option in the service applet to the local user and not using a Admin specified user.
Just an Idea. also try on the command line net start "Cold Fusion Application Server" sometime you get a more descriptive error message to research -BT ----- Original Message ----- From: "Phillip B" <[EMAIL PROTECTED]> To: "CF-Talk" <[EMAIL PROTECTED]> Sent: Monday, August 12, 2002 1:42 PM Subject: Re: HELP! CF 5 using 99% CPU > > Start CF Application. If it goes to 99%, there is little point in > > checking your own templates/code or whatever, just reinstall CF. > > I turned off all services and started each them one at a time. I didn't have > any problems until I hit the CF Application. That's when it went to 99% CPU. > Plus my webserver log is full of "Error occurred while connecting to > service" every few seconds. > > So you think I should just reinstall? > > Ughhhhhhhhh > > Phillip Broussard > Tracker Marine Group > 417-873-5957 > > ----- Original Message ----- > From: "Jochem van Dieten" <[EMAIL PROTECTED]> > To: "CF-Talk" <[EMAIL PROTECTED]> > Sent: Monday, August 12, 2002 3:11 PM > Subject: Re: HELP! CF 5 using 99% CPU > > > > ______________________________________________________________________ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/[email protected]/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
