Hey
Folks,
Is this the Dreaded DLLHost Issue?...
We are having the same problem, first we thought is was code or a bad DLL,
then we thought it was the MDAC(Lots of problems if you have a bad data
driver). Now after reading this thread, we have downloaded the SP2 again
and will reinstall.
We are running a Dual Pentium3 Server Gig o Ram CF 4.5.1 SP2 IIS nothing
else!
Should Fly, but chokes instead.
Any thoughts on the MDAC
JB
-----Original Message-----
From: Philip Arnold - ASP [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 03, 2001 12:53 PM
To: CF-Talk
Subject: RE: Server at 100% problem
Just as a little bit of "Further Information", I've been watching the CPU
usage this afternoon (via Task Manager) and about 90-95% of the time
(including "busy periods") it stays below 50% utilisation, it's just at
certain points it hit 100% for a couple of seconds and then (usually) drops
back down again, it's just it occasionally it hits 100% and stays there
permanently...
The other servers seem to "never" go over the 50% mark...
Pigging annoying
Philip Arnold
Director
Certified ColdFusion Developer
ASP Multimedia Limited
T: +44 (0)20 8680 1133
"Websites for the real world"
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
**********************************************************************
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
Archives: http://www.mail-archive.com/[email protected]/
Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
