|
I did a little
research regarding the torque ratings for manual transmissions.
Apparently, the torque rating is based on a "static" test, meaning torque
is applied to a non-spinning transmission to determine how much it can take
before something breaks. Naturally that breakage point will be higher than
the ratings that are published.
If I remember correctly, the Richmond 6 is
rated at 450lbs. According to Dyno 2000, my 454 makes 480lbs+ throughout
its RPM range. Since I only have 10" wide wheels with 285 size
tires, I doubt I'll ever get enough traction to worry about the torque
capacity of the tranny.
Besides, most Muncie's are rated around
200-250lbs and they've survived behind lots of big blocks over the
years.
cYa- |
- Re: [Chevelle-List] Tremec into a '66/'67? KNUTSONChevelle
- Re: [Chevelle-List] Tremec into a '66/'67? T. H.
- Re: [Chevelle-List] Tremec into a '66/'67? Michael Pell
- Re: [Chevelle-List] Tremec into a '66/'67? Herbert Lumpp
- Re: [Chevelle-List] Tremec into a '66/'67? Kelly C. Hanna
- Re: [Chevelle-List] Tremec into a '66/'67? Z16CHEVELLEGUY
- Re: [Chevelle-List] Tremec into a '66/'67? Kelly C. Hanna
- [Chevelle-List] Manual Trans torque specs; Tremec vs ... Michael Pell
- Re: [Chevelle-List] Tremec into a '66/'67? Sean Martinez
- Re: [Chevelle-List] Tremec into a '66/'67? Z16CHEVELLEGUY
- Herbert Lumpp

