Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
The 68-72 is a bit wider than your 67. Its either 1" or 1" each side, I don't remember exactly which. But, the rear will bolt in to your 67. Depending on how close your tires are to the fender, you may need to change the backspace on your wheels. Also there are slight differences in how the springs seat on the axle, you may need to change springs to the later type. Someone else here will have info on the exact dimensions and the spring issue. rick On Fri, 11 Jan 2002 00:13:55 -0800 "Mel Anderson" <[EMAIL PROTECTED]> writes: > Hi ....I am looking at an add for a re-built 68-72 12 bolt - posi > 3.31 rear end that is suppose to be in mint condition......the > assembly is drum to drum off a 6cyl wagon and I wanted to know if it > could be swapped with my current 67 3.08 10 bolt rear end . > > Is the drum to drum measurement the same ? is this a do-able swap or > do I need a 66-67 rear end housing? > > Mel > 67 Malibu SS > > > > > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
