Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Thanks to all for the answers. Mel 67 Malibu SS ----- Original Message ----- From: "richard a schaefer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 11, 2002 11:12 AM Subject: Re: [Chevelle-List] rear end swap > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > The 68-72 is a bit wider than your 67. Its either 1" or 1" each side, I > don't remember exactly which. But, the rear will bolt in to your 67. > Depending on how close your tires are to the fender, you may need to > change the backspace on your wheels. Also there are slight > differences in how the springs seat on the axle, you may need to change > springs to the later type. Someone else here will have info on the > exact dimensions and the spring issue. > rick > > On Fri, 11 Jan 2002 00:13:55 -0800 "Mel Anderson" <[EMAIL PROTECTED]> > writes: > > Hi ....I am looking at an add for a re-built 68-72 12 bolt - posi > > 3.31 rear end that is suppose to be in mint condition......the > > assembly is drum to drum off a 6cyl wagon and I wanted to know if it > > could be swapped with my current 67 3.08 10 bolt rear end . > > > > Is the drum to drum measurement the same ? is this a do-able swap or > > do I need a 66-67 rear end housing? > > > > Mel > > 67 Malibu SS > > > > > > > > > > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
