Replies to this message are sent to The Chevelle Mailing List
------------------------------------------------------------

1" wider per side.  66-67 assembly is better, but harder to find


>From: "Mel Anderson" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: Re: [Chevelle-List] rear end swap
>Date: Fri, 11 Jan 2002 20:52:32 -0800
>
>
>Replies to this message are sent to The Chevelle Mailing List
>------------------------------------------------------------
>
>Thanks to all for the answers.
>
>Mel
>67 Malibu SS
>
>----- Original Message -----
>From: "richard a schaefer" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Friday, January 11, 2002 11:12 AM
>Subject: Re: [Chevelle-List] rear end swap
>
>
> >
> > Replies to this message are sent to The Chevelle Mailing List
> > ------------------------------------------------------------
> >
> > The 68-72 is a bit wider than your 67.  Its either 1" or 1" each side,  
>I
> > don't remember exactly which.  But, the rear will bolt in to your 67.
> > Depending on how close your tires are to the fender, you may need to
> > change the backspace on your wheels.      Also there are slight
> > differences in how the springs seat on the axle, you may need to change
> > springs to the later type.   Someone else here will have  info on the
> > exact dimensions and the spring issue.
> > rick
> >
> > On Fri, 11 Jan 2002 00:13:55 -0800 "Mel Anderson" <[EMAIL PROTECTED]>
> > writes:
> > > Hi ....I am looking at an add for a re-built 68-72  12 bolt - posi
> > > 3.31 rear end that is suppose to be in mint condition......the
> > > assembly is drum to drum off a 6cyl wagon and I wanted to know if it
> > > could be swapped with my current 67 3.08 10 bolt rear end .
> > >
> > > Is the drum to drum measurement the same ? is this a do-able swap or
> > > do I need a 66-67 rear end housing?
> > >
> > > Mel
> > > 67 Malibu SS
> > >
> > >
> > >
> > >
> > >
> >
> > -----------------------------------------------------
> > To Unsubscribe please visit www.chevelles.net/list.html
> > To start a new topic, send mail to: [EMAIL PROTECTED]
>
>
>-----------------------------------------------------
>To Unsubscribe please visit www.chevelles.net/list.html
>To start a new topic, send mail to: [EMAIL PROTECTED]


_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx


-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]

Reply via email to