RE: [Chevelle-List] Four Speed to Automatic

[396guy]

-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Lojac Sent: Friday, March 29, 2002 1:08 AM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Four Speed to Automatic What is a neutral safety switch and do you have to have one on a 69 chevelle SS?     The neutral safety switch is used so you CANNOT start the car in gear - usually only Neutral and Park.  Whether you install it is up to you but I certainly would.    Is it the "column to tranny linkage for safety reason" part in the explaination below?     No - see above.     What is a range select lever?      Probably referring to the shift linkage on the transmission itself.    Does that come on a rebuilt tranny?    May or may not depending on the rebuilder.  Should come with any aftermarket shifter however.  If you're going with factory linkage, this is just one of the parts you'll need.   Dale McIntosh ACES #1709/TC #92 Gold 67 SS/67 Elky http://www.dalesplace.com http://www.team67.com http://www.midwestchevelles.com   ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, March 23, 2002 11:36 PM Subject: Re: [Chevelle-List] Four Speed to Automatic column shift or floor shift? if its a column shift, then u need the linkage from the column to the tranny if its a floor shift then you will need a shifter, cable, range select lever, the column to tranny linkage for safety reasons, console assembly, console wiring, console mounts. If you already have a console then forget about all the console stuff, you will just need a new auto top plate. Hope this helps! Tom