RE: [Chevelle-List] Four Speed to Automatic

[Cecil \"Steve\" Martin]

Hey Lojac,                  I am about to convert from Auto-Magic on the column to  “4 on the floor”. Want to swap some parts? It has a TH350 in there right now. I am in Ohio.                                                           Steve   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Lojac Sent: Sunday, March 24, 2002 10:49 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Four Speed to Automatic   Is this an easy swap or complicated?  I have been doing some reading on the web about having to shorten the drive shaft because of the length of the TH400.  Is this true?  I was also wanting to use a TH700....is this any different from doing the swap with the TH400???   Thanks, Lojac   ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, March 24, 2002 10:40 PM Subject: Re: [Chevelle-List] Four Speed to Automatic   In a message dated 3/24/2002 10:09:54 PM Eastern Standard Time, [EMAIL PROTECTED] writes: I want to make the car a floor shift.  I will need the shifter, cable, console, automatic tranny, crossmember (or will my m21 crossmember work?), tranny cooler.  Is there anything else?  What is a range select lever?  How hard is the conversion?  the crossmember is the same, if you go to a TH400 just move it back to the next set of holes.  the range select lever is the part on the side of the tranny that moves to change the gears. Tom