My ignition stystem is not stock. I have an Acell Super Coil and an Accel Billet distributor. I am looking for a custom fit wire set because i dont really care to make my own.
Brad, I dont quite understand how to test the coil the way you explained. Could you please go a little more indept for me. Keep in mind this is all knew to me so you have to be a little patient. Thanks Michael >From: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Re: [Chevelle-List] Plug wires >Date: Fri, 10 May 2002 16:58:18 +0000 > >A good set of 8mm or 8.5mm wires should be fine if your >ignition system is stock or mildly modified. I've had >good luck with Taylor, MSW, and Autolite wires. If you >want, take your ohmmeter and measure the resistance of >each wire; a *good* parts store will let you do this >before you actually pay for them. You're looking for >low resistance and consistent readings for all 8 wires. > >You can test the coil by measuring the resistance across >the terminals. A Super Coil should produce a fairly low >reading on your ohmmeter. > >Brad > > > First of all what are some good plug wires that i could use for my 454. >I > > have an accel ignition system on it now so i was thinking about going >with > > their 300+ wires. > > > > Secondly, I have an Accel super coil and i was curious as to whether or >not > > there is a way to test these to see if they are putting out any power. >Due > > to a new theory i think this might be why my car will not start. > > Thanks > > Michael > > >----------------------------------------------------- >To Unsubscribe please visit www.chevelles.net/list.html >To start a new topic, send mail to: [EMAIL PROTECTED] _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
