I cant believe I screwed on that reply...this is what I 
MEANT to say... the big hose goes from the water pump to 
the top and the little hose goes from the bottom to the 
intake.....It would only make sense for the bigger hose 
to come from the "Supply" (water pump) and the little 
hose to be connected to the return. Supply being bigger 
than return ensures the heater core stays full. So dale, 
now that I've totally confused you, which one are you 
going to swap?
Fred
> You mean 3/4" (not 3/8") hose from intake to bottom connection?
> 
> Dale
> 
> >  -----Original Message-----
> > From:       [EMAIL PROTECTED] 
> > [mailto:[EMAIL PROTECTED]] 
> > Sent:       Tuesday, July 02, 2002 6:46 PM
> > To: [EMAIL PROTECTED]
> > Subject:    RE: [Chevelle-List] Heater hose sizes and connections
> > 
> > Dale,
> >  I had to run out and check mine! Both my 67 SS 396, and my 67 L6 
> >  Elky(note NOT LS6 :-()  have 5/8" heater hoses going from the 
> > water pump to the top "bung" on the heater and 3/8" hoses from 
> > the intake to the bottom "bung"...both non A/C....seems to be correct 
> > judging the size of the fittings.
> > Fred
> >  
> > 
>               > -----Original Message-----
>               > From: [EMAIL PROTECTED] 
>               > [mailto:[EMAIL PROTECTED]] 
>               > Sent: Tuesday, July 02, 2002 7:26 PM
>               > To: Chevellelist
>               > Subject: [Chevelle-List] Heater hose sizes and connections
>               > 
>               > Reading a post on TC concerning heater hose size and
> checking my 
>               > two cars, I'm in a quandary.
>               > 
>               > I have a 67 327 Elky with factory air and a 67 396 SS
> without factory air.
>               > 
>               > Elky:
>               > 5/8" heater hose from intake to bottom bung on heater box
>               > 3/4" heater hose from water pump to top bung on heater box
>               > 
>               > SS396:
>               > 5/8" heater hose from water pump to bottom bung on heater
> box
>               > 3/4" heater hose from intake to top bung on heater box
>               > 
>               > I've had the 67 SS running this way for any number of
> years but I 
>               > just got the Elky last fall and haven't replaced hoses
> yet.  It 
>               > seems the hose sizes and locations are just the opposite
> between 
>               > the two cars.  Does the A/C make a difference or is that
> one's a 
>               > small block and one's a  big block?

-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]

Reply via email to