I can mainly just hear it. I wouldnt know how to tell wether or not it is detonation but i would figure if it was then it would do it throught the rpm band and under WOT too and not just at 3000 rpms. I have no idea what the timing is set at. Michael
>From: "Capt Crunch" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: <[EMAIL PROTECTED]> >Subject: Re: [Chevelle-List] Engine problem >Date: Fri, 2 Aug 2002 16:20:00 -0500 > >No power loss but a miss? Can you feel it or just hear it? Are you sure it >isn't detonation? What is you base and total timing set at? > >I agree... use either NGK V-Powers or AC Delco's. You will also want to >open your gap out to about .045 at least if you want any benefits from the >MSD system. I have mine at .055. Also check the wires, cap, rotor as >stated. Good Luck! > >Mikey > >----- Original Message ----- >From: [EMAIL PROTECTED] >Sent: Friday, August 02, 2002 3:19 PM >To: [EMAIL PROTECTED] >Subject: Re: [Chevelle-List] Engine problem > >just a thought, have you installed new wires or at least check them, make >sure there on the plug secure? >KenD 72H.C.C. _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
