RE: [Chevelle-List] Which Spal Pusher Fan for 67 SS

[Brenna Olwine]

Your initial e-mail when you first joined the list will tell you how to unsubscribe! Brenna   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Wanda Campbell Sent: Thursday, September 26, 2002 6:23 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Which Spal Pusher Fan for 67 SS   Take Wanda Cambbell off your list and Josh Campbell I have asked you to do this MANY MANY times. Stop sending this crap!!!!!!!!!! ----- Original Message ----- From: Wanda Campbell To: [EMAIL PROTECTED] Sent: Tuesday, September 10, 2002 8:26 PM Subject: Re: [Chevelle-List] Which Spal Pusher Fan for 67 SS   take me off your list josh campbell ----- Original Message ----- From: Craig A. Ellis To: '[EMAIL PROTECTED]' Sent: Friday, September 06, 2002 2:25 PM Subject: RE: [Chevelle-List] Which Spal Pusher Fan for 67 SS   Oh yeah. Clutch fan. It'll sit in traffic without trouble. On a super hot day it'll creep up to 190 if I leave it idling with the AC on - like in a bumpertobumper traffic jam. I've been real pleased with it. Only complaint is no overflow can so I bought a nifty chrome billet alum one from Weapon-R that I'm gonna try to install this weekend.   C -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Youngblood, Skip (T&K at Alcoa) Sent: Friday, September 06, 2002 2:06 PM To: '[EMAIL PROTECTED]' Subject: RE: [Chevelle-List] Which Spal Pusher Fan for 67 SS Allot depends on motor combination and age of motor, Aluminum heads, wild cam  etc.... . Craig your are a lucky man to have a big block hold that temp with copper rad... I wasn't able to do it. So I went Alum. No problems since.  Do you have a clutch fan? -----Original Message----- From: Craig A. Ellis [mailto:[EMAIL PROTECTED]] Sent: Friday, September 06, 2002 11:34 AM To: '[EMAIL PROTECTED]' Subject: RE: [Chevelle-List] Which Spal Pusher Fan for 67 SS My system has a four core copper rad with 7 blade fan. 180 all the time. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Youngblood, Skip (T&K at Alcoa) Sent: Friday, September 06, 2002 11:59 AM To: '[EMAIL PROTECTED]' Subject: RE: [Chevelle-List] Which Spal Pusher Fan for 67 SS take the clutch fan off and get a flex fan. My car idles in traffic at 180 190 on a 105 deg day and I have to put thermostat in to warm up enough for the blower ..highway temp 160.   Skip 68SCBB -----Original Message----- From: Ken's Email [mailto:[EMAIL PROTECTED]] Sent: Friday, September 06, 2002 9:38 AM To: [EMAIL PROTECTED] Subject: [Chevelle-List] Which Spal Pusher Fan for 67 SS I have upgraded my cooling system with a new aluminum radiator, water pump, fan clutch and shroud. Has gone from 230 plus at idle to a steady 210 with 180 degrees on the road. I want to add a Spal Pusher fan. My question is which one ? Do I go with the Spal 16 inch pushing 1920 CFM with 17.4 amps, or go with the Spal 16 inch pushing 2360 CFM at 21.6 amps. I have the original alternator in the 67 Chevelle SS. I do not have a stereo, AC, or power supplies. Will I have to upgrade the alternator. Note:  We conducted a test. With the 67 SS idling for 30 minutes it went up to 210 but stayed there. We used a floor fan pusing air through the radiator and it dropped to 185 degrees. Comments please. Thanks, Ken McDee             Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes