I'd love to see what it says about my combo as well, if someone would be willing..
406 cid 5.7 rods flat-top piston with 76cc head -- '71 487X casting, 1.94 / 1.50 valves Summit Cam -- 234/244 @ .050", .488/.510 lift with Crane 1.5 full roller rockers Edelbrock Performer RPM (not air-gap) Holley 750 vacuum secondary (3310-3) HEI w/ MSD 6AL -Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Tigergutt Sent: Thursday, December 18, 2003 4:21 PM To: 'The Chevelle Mailing List' Subject: RE: [Chevelle-list] My combo on desktop dyno. Med Vennlig Hilsen/Kind Regards/Cordiali Saluti Andr� Broe Jensen Would someone be so kind to run my combo on their desktop dyno 355 cid 10,5 compression Summit 282deg cam. Intake & Exhaust duration 224deg at 0,50� Intake & Exhaust lift 0,496� with 1,6 ratio rockers Camel humps 292 Heads 2,02 & 1,60 stainless valves, Edelbrock Performer RPM manifold, Edelbrock 600cfm Performer carb, manual choke Hei Distributor with MSD coil and module. Will this make 350 hp??? Thanks ! Andr�
