Thanks everyone for the info! I hope I can get her outta there, and get my seatbelts installed. I'd love to be able to take the whole family out before the snow starts flying again! Anyone know if I need to get the upper part of the seat off to install the belts, or would just the bottom give me access to everything I need?
SARGE -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Nasta Sent: Monday, July 19, 2004 8:39 AM To: The Chevelle Mailing List Subject: RE: [Chevelle-list] Backseat 1969 To get the base out, push down hard on the front edge, then pull forward. The back is held by a couple of bolts at the bottom, and hooked over the top (so lift up to remove it). HTH, John Nasta -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Fruhauf Kerry A SSgt 3 CS/SCBS Sent: Monday, July 19, 2004 12:16 PM To: [EMAIL PROTECTED] Subject: [Chevelle-list] Backseat 1969 OK, It's been a while since I've posted on the list. But it seems that I am in need of your expertise! Apparently I have been defeated by my backseat. I'm trying to remove it so I can install new seatbelts for my kids, and I cant figure out how to get it out. It seems to just be a matter of tugging on it with enough force, but it's awfully tight, and I'd hate to trash the seat by ripping it out in haste. Anyone ever have the rear seat out? Is there a trick? On a completely separate note, my new 383 is running like a champ, now that I figured out my problems. It seems a Holley blue electric fuel pump does not quite agree with an Edelbrock 1406. Something about the PSI being off by 10 or so! :) SARGE
